Scania Truck S500 A6x2NB and P360 B6x2*4NB recall: The clamping force on the pinion bearing has become too low when fitting the nut to the end yoke
Yes – some of these vehicles are being recalled
- What's wrong
- The clamping force on the pinion bearing may have been too low when fitting the nut to the end yoke.
- What to do
- Contact a Scania Truck dealer to book the free repair. The nut must be renewed and torque tightened according to a new method.
Source: Driver and Vehicle Standards Agency (DVSA)
Check your reg on DVSA ↗
What’s wrong
The clamping force on the pinion bearing may have been too low when fitting the nut to the end yoke.
The fix
The nut must be renewed and torque tightened according to a new method.
Vehicles affected
| Model | Built from | Built to | Vehicles |
|---|---|---|---|
| S500 A6x2NB | 1 Aug 2022 | 31 Aug 2022 | 2 |
| P360 B6x2*4NB | 1 Jun 2022 | 30 Jun 2022 | 2 |
How to check your vehicle
Use the official DVSA checker with your registration number to see if your exact vehicle is included. If it is, the manufacturer should have written to the registered keeper. The repair is free, even if you bought the vehicle second-hand.
Updated 25 November 2022. This page summarises an official notice. Details can change – always follow the official notice.