Suzuki GSX-S125 recall: Ignition switch fault could cause engine to stop during use
Yes – some of these vehicles are being recalled
- What's wrong
- Excess soldering flux is left on the terminals of the ignition switch; continuing to drive in this condition the remaining flux may soften and spread across and cause poor conduction of the ignition switch. In the worst-case scenario the engine could stop when the motorcycle…
- What to do
- Contact a Suzuki dealer to book the free repair. Replace the ignition lock set.
Source: Driver and Vehicle Standards Agency (DVSA)
Check your reg on DVSA ↗
What’s wrong
Excess soldering flux is left on the terminals of the ignition switch; continuing to drive in this condition the remaining flux may soften and spread across and cause poor conduction of the ignition switch. In the worst-case scenario the engine could stop when the motorcycle is running.
The fix
Replace the ignition lock set.
Vehicles affected
| Model | Built from | Built to | Vehicles |
|---|---|---|---|
| GSX-S125 | 16 Jun 2017 | 16 Jun 2017 | 19 |
How to check your vehicle
Use the official DVSA checker with your registration number to see if your exact vehicle is included. If it is, the manufacturer should have written to the registered keeper. The repair is free, even if you bought the vehicle second-hand.
Updated 24 April 2018. This page summarises an official notice. Details can change – always follow the official notice.