Volvo Trucks FM and FH recall: Brake pedal may be incorrectly assembled
Yes – some of these vehicles are being recalled
- What's wrong
- It has been identified there is a possibility that during production the split pin for the brake pedal cross shaft may not have been correctly installed. This could result in the reduction of braking effort due to the movement of the cross shaft.
- What to do
- Contact a Volvo Trucks dealer to book the free repair. Recall all affected vehicles to check and if required fit a split pin or further secure the currently installed split pin.
Source: Driver and Vehicle Standards Agency (DVSA)
Check your reg on DVSA ↗
What’s wrong
It has been identified there is a possibility that during production the split pin for the brake pedal cross shaft may not have been correctly installed. This could result in the reduction of braking effort due to the movement of the cross shaft.
The fix
Recall all affected vehicles to check and if required fit a split pin or further secure the currently installed split pin.
Vehicles affected
| Model | Built from | Built to | Vehicles |
|---|---|---|---|
| FM | – | – | 9,631 |
| FH | – | – | 9,631 |
How to check your vehicle
Use the official DVSA checker with your registration number to see if your exact vehicle is included. If it is, the manufacturer should have written to the registered keeper. The repair is free, even if you bought the vehicle second-hand.
Updated 13 March 2017. This page summarises an official notice. Details can change – always follow the official notice.