Citroen Berlingo recall: BCM software update – Black screen
On affected vehicles a software defect in the instrument cluster may prevent the cluster display from switching on when the vehicle is started resulting in a black screen.
Every UK recall and safety alert for Citroen products, with what's wrong, which models or batches are affected and what to do. Updated automatically. 39 listed.
On affected vehicles a software defect in the instrument cluster may prevent the cluster display from switching on when the vehicle is started resulting in a black screen.
On affected vehicles the Body Control Module is not correctly configured to detect a failure in the indicator lamps. As a result if a turn indicator bulb fails it's not detected and the indicator…
Affected vehicles may experience an unexpected deactivation of the interior door handles when the key is in engine-running mode which could result in occupants being unable to exit.
Affected vehicles have a smart tachograph fitted that may not comply with regulatory requirements.
On affected vehicles the Lane Keep Assist tell-tale fails to illuminate if the front camera is blocked meaning no warning light appears in the instrument cluster.
On affected vehicles the Motor Control Unit (MCU) Inverter may have a manufacturing deviation which could lead to gearbox malfunctions and the risk of an internal electrical short circuit leading to overheating or a…
On certain Citroen vehicles the Automatic Emergency Braking Assist telltale fails to illuminate if the front camera is blocked. No AEB warning telltale meaning no warning light appears in the instrument cluster. An additional…
Affected vehicles may exhibit improper headlamp levelling due to an incorrectly assembled Body Height Sensor.
Affected vehicles may have the incorrect speed limit displayed.
On affected vehicles due to a Body Control Module (BCM) software weakness an alarm siren may randomly trigger when the vehicle is locked.
On affected vehicles due to a production nonconformity the water pump may malfunction which may cause a loss of engine power and result in the engine shutting down.
Affected vehicles may have a power steering harness routed between two screws where minor vibrations could cause harness damage resulting in a possible short circuit. This could lead to a loss of power‑steering assistance…
Affected vehicles may have been assembled with contact or with a reduced clearance between the Gasoline Particulate Filter pipe and the pole protection cap of the 48V Belt Starter Generator. There is a possibility…
Affected vehicles equipped with a multifunctional front camera module may face a non-compliance to regulatory requirements due to incorrect front camera module calibration.
Affected vehicles may have been fitted with fuel return pipes not according to specification which can lead to a fuel leak.
On affected vehicles a non-conformity issue with the fuel injection common rail may lead to a loosening of the nut and a potential fuel leak.
On affected vehicles the incorrect wheel bolts may have been fitted which could result in loosening or loss of the bolts.
On affected vehicles there may be a software bug in the Body Control Module (BCM) which prevents a connection to the server and affects the speed limit indication system.
Affected vehicle may face a black screen on the Instrument Panel Cluster with several functions not available to view.
On affected vehicles there may be an insufficient brake pedal bracket connection due to a missing or incorrectly assembled pin. If the pin falls out the brake pedal will potentially disengage.
On affected vehicles there is an issue with the Engine Control Module (ECM) calibration which may lead to non-compliance with regulatory emission requirements.
Affected vehicles may have incorrect or missing tyre pressure messages displayed in the instrument cluster due to a software deviation.
Affected vehicles may have been equipped with rear brake discs out of specification. These brake discs have insufficient contact with the wheel hub resulting in abnormal stress concentration.
On affected vehicles the engine will run all the time and will not shut off in start/stop mode due to incorrect Body Control Module coding.