Citroen C4 AIRCROSS recall: The battery charge program may not be correct to specification
The battery charge program may not be correct to specification.
Every UK recall and safety alert for Citroen products, with what's wrong, which models or batches are affected and what to do. Updated automatically. 177 listed.
The battery charge program may not be correct to specification.
The wires in one of the connectors of the seats position sensor may not be correct
Excessive loading of the front suspension could result in the loosening of the front wishbone lower ball joints.
The air conditioning compressor pulley could break and damage other components.
The rear suspension wishbone mountings bolts may not be correct to specification.
The fixing bolt of the front Suspension wishbone may not be correct to specification.
The steering rack assembly may not be correct to specification.
The universal clamp fixing bolt is not correctly fitted in the recess at the end of the steering column.
On the affected vehicles the bonding of the rear door window glass to the hinge assemblies may not conform to specification.
There is a possibility that the sunroof glass assembly could detach itself from the outer frame
Ancillaries drive belt tensioner mounting may not be correct to specification.
On the affected vehicles the tightening torques of the anti-theft wheel bolts may not be to the correct to specification.
On the affected vehicles the crimping preventing lateral movement of the steering column bearing may not be correct to specification. This may result in noise and play in the steering. Ultimately it could lead…
The tow ball bracket could not withstand mechanical constraints when subjected to the highest stress levels which can occur during the vehicle's lifetime.
The cooling system strategy and the maximum temperature alert could cause the engine to overheat this may cause an oil leak from the sump drain cap. Due to the incorrect operation of the warning…
On the affected vehicles the tightening of a sealing plug on the engine oil gallery may not be correct to specification.This could lead over time to an oil leak which in rare cases could…
Engine could overheat leading to failure in extreme cases
On the affected vehicles an internal component within the airbag triggering ECU may have been damaged which could lead to non deployment. There are no early warning signs or symptoms for the customer to…
On the affected vehicles the windscreen wiper motor breather system may not be To the correct specification. This could in some cases result in water ingress leading to jamming of the motor due to…
On affected vehicles the locking nut of the rear wheel hub bearings may not be correct to specification. In extreme cases this may affect control of the vehicle.
The engine electronic cooling management control strategy and the maximum temperature alert threshold could cause the engine to overheat. This could result in a warning light and a message being displayed on the instrument…
An engine component may not be to specification which could result in loss of engine performance. This may lead to the engine stalling and potentially causing an engine failure. In very unlikely circumstances the…
An engine component may not be to specification which could result in loss of engine performance. This may lead to the engine stalling and potentially causing an engine failure. In very unlikely circumstances the…
The bonnet inner skin may not be adequately retained. This may cause the bonnet to vibrate or distort. In extreme cases the skin could detach.