Is there a recall on your Nissan? Check every DVSA safety recall for Nissan vehicles (162 since 1993) by model and year, with what's wrong and the free fix. 80 listed.
On affected vehicles the manufacturer will increase the maximum target efficiency of the SCR system in online dosing mode to further improve the emissions of the vehicle.
A potential concern affecting the Vehicle Control Module (VCM) logic of some vehicles has been identified whereby in specific and rare circumstances after switching off the cruise control function there is a possibility of…
On affected vehicles the child lock function on the rear door locks may be out of specification. The child lock may become disengaged when the inside door handle is operated.
In certain vehicles should the driver�s seat be set in the position where it coincides with a design feature�in the upper rail it may�in certain conditions exceed the stress limits of the rail material.
On affected vehicles a potential software concern may result in the combination meter screen intermittently switching OFF for 5 seconds and then switching back ON.�
A potential concern affecting the HEVC (Hybrid Electric Vehicle Control) module software has been identified which may cause a module reset of affected vehicles. Simultaneous pressing of brake and accelerator could cause engine stumble…
The injectors may not have been correctly torqued during assembly. Under specific driving conditions this can cause the leakage of exhaust gasses past the injector sealing washer.
The torque value given in the Repair bulletin for R/2022/254 for the injector clamp bolts was insufficient. Under specific driving conditions this can cause the leakage of exhaust gasses past the injector sealing washer.
Potential fuel ingress into a piezo-electric actuator unit within the fuel injectors.
Some steering rack trial parts were reintroduced into the normal production process.
The rear seat back may not be securely latched when returned to the upright position after folding.
The Right-Hand Rear Brake Caliper could fail during an activation of the parking brake.
The incorrect weight information was applied to the Certificate of Conformity (COC).
The steering knuckles may deform affecting the steering performance.
Contact of the fuel supply pipe with the cylinder head cover causing pipe wear.
The drivers� bag may tear during inflation.
The welded joint on the park lock actuator plate may be of poor quality and has the potential to fail during usage.
Possible reduced retention force of the Rear Door Child Lock switch.
The rear brake caliper handbrake lever pivot pin may break during handbrake operation
The rear brake caliper assembly fixings may have been insufficiently tightened
Passenger air bag may not deploy correctly..
Incorrect permissible front axle figures were given on the VIN label.
The masses applied on the VIN label may be incorrect.
The torque applied to right rear leaf spring U-bolts may not be as per specification