Volkswagen recall: Too little torque may be provided by the engine at low engine speeds
Too little torque may be provided by the engine at low engine speeds.
Is there a recall on your Volkswagen? Check every DVSA safety recall for Volkswagen vehicles (224 since 1992) by model and year, with what's wrong and the fre… 151 listed.
Too little torque may be provided by the engine at low engine speeds.
A welded connection of the rear seat bench may not have been correctly performed.
Water may get into the vehicle interior and run onto the control units for the rear lid
Water may get into the vehicle interior and run onto the control units for the rear lid
An incorrect multiple fuse was installed in the electronics box.
There is a possibility that due to a fault in the production process there is a crack on the frame of the left front seat.
A tow bar with a possible defective locking mechanism in the swivelling module.
A possible faulty bonded joint between sun roof trim panel and sun roof frame.
A casting process error may affect the rigidity of the front shock absorber fork.
Hand brake lever travel increase due to adjuster nut movement.
Increased humidity may have got into the propellant of the gas generator for the drivers air bag.
The bonding of the upper and lower sections of the rear spoiler may be faulty.
The rear back rest head restraint mounting is not correctly welded.
Possible short circuit in LED lighting module of the panoramic roof.
The seat belt buckle holder of the right rear seat may not meet specification.
Left rear seat belt may unfasten involuntarily.
Kitchen bolted gas connections may not have been correctly fitted.
The electro-mechanical park brake may be released inappropriately.
On Passat vehicles of a limited production period the retaining spring of the head restraint guide may be faulty because of a production problem. Because of a faulty retaining spring in an accident the…
On Tiguan Allspace vehicles of a limited production period faulty passenger airbags may have been fitted. When the passenger airbag module was produced the airbag may have been incorrectly folded. As a result there…
On affected vehicles the nut of the bolted connections of the front (left and right) swivel joints on the wheel bearing housing may not have been tightened to the correct torque. in case of…
Rear caliper pistons incorrectly coated.
On a limited production period a burr may have developed on the locking bar of the head restraint guide.
On a limited production period a burr may have developed on the locking bar of the head restraint guide.