
Nassboards Telescoping Ladder sold via Amazon
The product presents a high risk of injuries as testing found the ladders would collapse and bend under various testing conditions and fail the minimum requirement for normal use.
UK recalls involving Injuries: affected products, models and batches, and what to do if you own one. 502 listed.

The product presents a high risk of injuries as testing found the ladders would collapse and bend under various testing conditions and fail the minimum requirement for normal use.

BlendJet has detected two manufacturing defects in affected units. The blade may break off and can produce sharp blade pieces, presenting a risk of injuries. Additionally, the battery may overheat, presenting a risk of…

The product presents a risk of injuries due to the potential for fingers to enter the top cowl air vents on some engine models.

The product presents a high risk of injuries as the toy may allow sharp objects to be placed into the chamber and fired. This would make the object able to penetrate the skin if…

The product presents a risk of electric shock as inadequate insulation of wiring could result in accessible metal components becoming live.

The product presents a risk of cuts/injuries and choking due to access to small parts and sharp edges.

The product presents a serious risk of drowning due to the absence of independent conformity assessment to demonstrate the product will perform when required.

The product presents a risk of injuries as one end of the handle may detach if pulled from the side.

Kinesis UK have identified that some of their Lyfe e-bikes, fitted with ‘Alhonga’ branded hydraulic brakes, may have the incorrect bolt length fitted.

The product presents a risk of injuries as the press fixture used to secure the assembly of the safe lock button moved outside of specification, creating the potential for a faulty press fit of…

Asda have identified a quality issue with the touch and close fastening becoming unstuck. There is a potential risk of tripping if the Velcro does not remain fastened.

The product presents a serious risk of injuries due to the absence of independent conformity assessment to demonstrate the product will perform when required.

The affected products may present a wrong folding of the airbag which may increase the time taken for the airbag to inflate.

The products present a risk of injuries as the toggle that is used to release and fold the handlebars may fold whilst riding causing an accident.

When assembled as intended on the rear of a refuse collection vehicle (RCV) and used in automatic mode, it is possible for operatives or members of the public to access the dangerous moving parts…

The products present a serious risk of injuries as there are inconsistent instructions for the maximum safe working load of the crane, which can lead to crane overload and failure.

During internal testing, Stihl Ltd detected anomalies with the chain break area with investigations showing potential issues with the reliability of chain braking time. In the event of kickback there may be an increased…

A manufacturing fault has been identified causing a weakness in some of the seams of the garment meaning that the product may not perform as expected when relied on when used for motorcycle riding.

The products present an injuries hazard as it has been identified that the sheath of the rope may wear suddenly during falls, resulting in adequate protection no longer being provided to the core of…

Under certain conditions, unexpected breakage of the spring guiding axis may occur, causing the ski boot to disconnect from the ski.

The product has been identified as presenting a serious risk of falling from a height as it was not supplied with the required compliance documentation or markings to demonstrate that it has been adequately…

The product presents a serious chemical risk and a serious risk of entrapment and injuries.

The affected products present a risk of injury as it has been identified that, in some specific instances, the pruners could start operating as the battery is attached, without activating the power trigger.

The product presents a risk of injuries as when the helmets are exposed to conditions equal to or colder than -10 degrees Celsius or immersed in a water bath for longer than 4 hours,…