All UK Cars, vans & lorries recalls and safety alerts, newest first, with the hazard, affected models and what to do next. 4,358 listed.
On affected vehicles damaged battery cells could have been installed in the high voltage battery which could lead to a thermal overload.
There is a risk that the rear seat rail lock might not function as designed
To comply with the regulation an additional crash pad is required behind the auxiliary battery.
Water may penetrate into the brake vacuum pump causing corrosion.
The right front lower arm assembly could be broken due to improper welding by the supplier.
The rear right brake calliper could display micro-cracks
The Diesel Particle Filter (DPF) might be defective / develop cracks.
On affected vehicle a blocked fuel pump nozzle may lead to a loss of power.
Vehicles are equipped with brake hose fittings with insufficient sealing.
Possible engine stall and restart failure.
Certain specific calibrations of functions must be changed in the engine management of the vehicles
The headlight adjustment might not meet the specification
An electrical overload event in the 48Volt (V) electrical system may cause a failure of the Metal Oxide Semiconductor Field Effect Transistor.
The filtering performance of the Diesel Particle Filter (DPF) may not meet the required specification.
The filtering performance of the Diesel Particle Filter (DPF) may not meet the required specification.
Vehicle rear wheel hub bolts may not be tightened according to specification and/or the incorrect wheel hub may be installed
The front axle support (subframe) welding process has not been completed according to specifications.
It may be possible that the ball type tow-bar does not meet the requirements of the fatigue strength.
Possible crack in the rear axle knuckle casting.
Gradual overheat degradation of the vehicle charge sockets.
There is a possible risk of the ignition switch not disengaging correctly after starting the vehicle resulting in the key jamming in the start position. In rare circumstances this may cause a thermal incident.
The welded joint on the park lock actuator plate may be of poor quality and has the potential to fail during usage.
Drivers airbag may not deploy correctly
It may be possible that the ball type tow-bar does not meet the requirements of the fatigue strength.