Daimler Buses SETRA S400 & 500 recall: Non approved screws were fitted to the brake anchor plate
Non-approved screws fitted to the brake anchor plate
All UK Cars, vans & lorries recalls and safety alerts, newest first, with the hazard, affected models and what to do next. 4,358 listed.
Non-approved screws fitted to the brake anchor plate
A malfunction of the rear lamps may occur
Possible improperly bolted swivel seat console
Drivers cabin door may not open due to corrosion in the wiring junction.
The transmission-reversing group may be switched from hydrostatic to manual transmission unintentionally.
; The software of the radar control unit might not meet the specification
The protective tinplate underneath the spare wheel recess might tear
Possible unintentional deactivation of the parking brake and vehicle roll away.
Premature degradation of emission control component.
Premature degradation of emission control component
Driver & Passenger air bag may deploy incorrectly if activated
The oil pressure solenoid valve may not switch correctly.
Premature degradation of emission control component.
Premature degradation of emission control component.
Premature degradation of emission control component
The material thickness of the wheel rims might be out of specification
There is a possibility that Primer was not added to the seals of the rear side windows
The refrigerant used in the air condition system does not meet legal requirements.
The front seatbacks may not have been welded to specifications by the sub-supplier.
Possible premature ignition of air/fuel mixture in the engine cylinder
Too little torque may be provided by the engine at low engine speeds.
Possible of deviation in the torque value on the U bolt for the rear right suspension blade
Cracks may develop in the brake pipes to the ABS unit.
The durability of the crankshaft might be impaired.