All UK Cars, vans & lorries recalls and safety alerts, newest first, with the hazard, affected models and what to do next. 4,358 listed.
The rear seatbelt pre-tensioner ignitors may not perform as expected. This could increase the risk of injury to the seat occupants. The lock functions of the rear seatbelts are not impaired.
Due to an error in production the left hand steering knuckle may not conform to specification. In extreme instances the knuckle may fail.
Due to an error in the engine control unit software the engine may shut down when braking from slow speeds such as pulling up at traffic lights. This may also affect the vehicles ECO…
The tyres may not comply with the requirements of certain US testing requirements (FMVSS 571.119 S6.1 and S7.2 Endurance). Specifically S6.1.2.(a) requires at the conclusion of the test there shall be no evidence of…
The catch bolt for the range change gearshift mechanism may work loose. This may affect gear changes and it is possible drive can be lost.
Water ingress into the bonnet release cable may cause corrosion and affect the operation of the cable which could lead to unintentional opening of the bonnet.
The rear axle casings may crack and oil may leak. In extreme cases the axle casing may fail.
The rear axle casings may crack and oil may leak.In extreme cases the axle casing may fail.
Due to an error in production the pinion shaft may not be sufficiently hardened and may fail. This may cause loss of drive and the prop shaft may detach at the pinion.
Due to an error during manufacture the rear cross member may not have been fully spot welded. This may compromise the integrity of the structure.
The left-side fold-flat second row seat may have a misadjusted cable that controls the recliner mechanisms. Incorrect adjustment may prevent one of the recliners from fully latching.
The rear axle casings may crack and oil may leak. In extreme cases the axle casing may fail.
The positioning of the starter supply terminal may be incorrect. This may allow it to foul other components and cause a short circuit.
The rear axle casings may crack and oil may leak.In extreme cases the axle casing may fail.
The starter motor supply cable from the battery may interfere with the EGR valve. This could cause damage to the insulation and cables.
The rear axle casings may crack and oil may leak. In extreme cases the axle casing may fail.
The rear axle casings may crack and oil may leak.In extreme cases the axle casing may fail.
Due to a lack of durability the steering lever may fracture at its fixings.
A potential chafing condition has been identified between the alternator power cables and coolant pipe which may result in short circuit .Electrical cables might short circuit.
The Occupant Restraint Controller (ORC) may experience a loss of air bag and seat belt pretensioner deployment capability during a crash due to a shorting condition resulting in a negative voltage transient that travels…
The striker wire on the bonnet lining may not have sufficient support to prove it with the security for its intended purpose. This can lead to incorrect locking of the bonnet over time and…
The vehicle sensitive locking mechanism for the front seatbelts may be incorrect causing either the belt not to lock or the webbing very difficult to pull out. If the locking mechanism does not function…
Due to a manufacturing issue with the front lower ball joint there is a possibility that the surface of the ball joint may be damaged while driving. If the vehicle is operated continuously the…
On affected vehicles the clip that retains the gearshift cables may not be fully engaged with the metal portion of the handbrake cable.