All UK Cars, vans & lorries recalls and safety alerts, newest first, with the hazard, affected models and what to do next. 4,358 listed.
It has been identified that the 3rd row seat belt stalk mounting bolt may not have been tightened to the correct specification during body modification. There is the possibility the seat belt mounting bolt…
In instances where the fuel tank is overfilled and in particular handling conditions liquid fuel could reach the fuel system carbon canister. Fuel reaching purge valves could affect functionality of the fuel EVAP system.…
The driver side front seat belt pre-tensioner cable could separate during deployment leaving the driver inadequately restrained in a collision which increases the risk of injury.
It has been identified that the density of the propellant within the airbag inflator may be insufficient due to inappropriate production and storage conditions of the propellant. In this condition the inflator may abnormally…
On the affected vehicles a possible non-conformity in the positioning of the fuel filler neck seal near the filler cap could cause a fuel leak when completely filling up the tank.
The tightening torque of one of the nuts of the connection between the brake servo unit and the brake pedal may be not correct to specification. This may allow air to enter the servo
The bolts retaining the front shock absorber could come loose. This may adversely affect the steering control of the vehicle.
On the affected vehicles a possible nonconformity of certain seals on the vehicle�s body could lead to water ingress in the passenger compartment. This may affect the operation of the passenger air bag. Unintended…
On the affected vehicles a possible nonconformity of certain seals on the vehicle�s body could lead to water ingress in the passenger compartment. This may affect the operation of the passenger air bag. Unintended…
It has been identified that the fuel filler neck assembly may not have been correctly installed at production. This can therefore result in a fuel leak from around the fuel filler area if the…
It has been identified that the wheel bolts may not have been tightened to the correct specification. The driver may experience a vibration through the steering wheel. However if not rectified there is a…
It has been identified that the wheel bolts may not have been tightened to the correct specification. The driver may experience a vibration through the steering wheel. However it not rectified there is a…
It has been identified that some ground connections of the cabin wiring harness and the fixings of the airbag control unit may not be to specification. This issue or non-compliance could cause erratic malfunctions…
It has been identified that some ground connections of the cabin wiring harness and the fixings of the airbag control unit may not be to specification. This issue or non-compliance could cause erratic malfunctions…
The bolts retaining the front shock absorber could come loose. This may adversely affect the steering control of the vehicle.
It has been identified that due to a possible non-conformity of certain seals on the vehicle�s body there is the possibility that water can enter the passenger compartment of the vehicle. The occupants should…
It has been identified that due to a possible non-conformity of certain seals on the vehicle�s body there is the possibility that water can enter the passenger compartment of the vehicle. The occupants should…
Incorrect assembly of the steering rack which could cause the loss of the mechanical link between the steering pinion valve and the steering rack during parking manoeuvres at full lock.
Incorrect assembly of the steering rack which could cause the loss of the mechanical link between the steering pinion valve and the steering rack during parking manoeuvres at full lock.
The tightening torque of one of the nuts of the connection between the brake servo unit and the brake pedal may be not correct to specification. This may allow air to enter the servo
It has been identified that the pins within the electric power assisted steering control unit may not have been contact welded correctly. This can result in an open circuit which will lead to a…
Due to an error in the manufacturing process the air bag and/or seat belt pretensioner may not trigger in the event of a collision
It has been identified that during production the temperature sensors for the alternator have been installed/located in the wrong position. This can result in the driver not receiving an early warning of the alternator…
Unions on certain brake pipes may not have been tightened to the correct torque. This may allow fluid to escape and affect the braking efficiency.