
Feytory Rechargeable Wrench
The product presents a serious risk of fire because it has poor internal electrical construction and the plug face does not meet the dimensional requirements of BS 1363.
All UK Machinery recalls and safety alerts, newest first, with the hazard, affected models and what to do next. 314 listed.

The product presents a serious risk of fire because it has poor internal electrical construction and the plug face does not meet the dimensional requirements of BS 1363.

The product presents a serious risk of electric shock because the insulation is insufficient and could break down during normal use of the product.

The product presents a high risk of fire as there is no evidence to demonstrate the conformity of the product, its battery, and/or charger.

The product presents a high risk of fire as the plug fuse has insufficient granular filler.

The product presents a serious risk of fire because there was no over-current protection found in the charger.

The product presents a serious risk of electric shock as the insulation is insufficient and may break down during normal use.

The product presents a risk of entrapment as some of the covers may create a gap wider than 4.5 inches when installed.

The product presents a serious risk of injuries as a result of the absence of a coherent conformity assessment and quality control regime.

The product presents a serious risk of fire as the battery has a thermal fuse which is not fitted adequately to the motor.

The product presents a serious risk of electric shock as the plug pins are too close to the plug face periphery.

The product presents a high risk of electric shock as the plug pins are too close to the plug periphery.

The product presents a risk of injuries as the blades do not stop promptly when the operating control is released.

The product presents a high risk of entrapment and injuries as there is inadequate safety guarding around the moving parts at the rear of the machine.

The product presents a serious risk of fire as the charger supplied has insufficient breakdown isolation and the plug does not meet the requirements of the relevant standard.

The product presents a serious risk of fire and injuries as it has poor internal soldering with wires soldered directly to the control module and no reinforcement.

Products fitted to boats with the specified HIN numbers present a risk of non-compliance due to an operating fault.

The product presents a serious risk of injuries as it was not supplied with the required information and warnings.

The product presents a high risk of injuries as the turret can run at full speed with the doors open.

The product presents a high risk of electric shock as it features poor quality connections and wires soldered directly to the PCB.

The product presents a high risk of electric shock as hte plug face and pins do not meet the dimensional requirements of BS 1363.

The product presents a serious risk of fire as it contains insufficient creepage and clearance distances.

The product presents a serious risk of electric shock as the plug does not meet the dimensional requirements of BS 1363.

The electric bicycle and its components have not been assessed using relevant UK conformity assessment procedures.

The product presents a high risk of electric shock as the insulated shutter opening device (ISOD) pin is too long.