Honda Motorcycles CBR1000SP/ST recall: The heat insulation of the resin hose for the oil cooler outlet pipe is insufficient
The heat insulation of the resin hose for the oil cooler outlet pipe is insufficient.
Motorcycles recalls page 4
All UK Motorcycles recalls and safety alerts, newest first, with the hazard, affected models and what to do next. 337 listed.
Lexmoto Titan ZN125T-8F-E5 recall: The installed spacer on the rear wheel behind the rear wheel nut is the incorrect thickness this can cause the nut to become loose and fall off.
The installed spacer on the rear wheel behind the rear wheel nut is the incorrect thickness this can cause the rear wheel nut to become loose and fall off.�
Triumph Trident recall: The side stand may bend over time and use causing an affected motorcycle to lean beyond its designated angle when parked
The side stand leg may bend over time and use causing an affected motorcycle to lean beyond its designed angle when parked.
Honda Motorcycles CBR1000SPL/STL and CMX1100AM/DM recall: The radiator cap may have insufficient sealant performance
In the cooling system of the engine the radiator cap may have insufficient sealant performance due to small overlap allowance with the filler neck.
Harley-Davidson Pan America S, Pan America, Sportster S recall: When the internal temperature of the instrument module (IM) is below 0 C the IM display may generate an error message
When the internal temperature of the instrument module (IM) is below 0 �C the IM display may generate an error message and then shortly after go blank until the next ignition cycle when the…
Harley-Davidson Pan America recall: Rider’s seat base threaded insert failure
Riders seat base threaded insert failure.
Honda Motorcycles NSS750M, X-ADV750M, NC750XDM recall: Engine speed may decrease momentarily
The engine speed may decrease momentarily when quickly opening the throttle from the fully closed position to a slightly opened position.
Lexmoto Milano FT125T-27-E4 recall: Exhaust mounting bracket bolts might come out
The rear brake and exhaust bracket may�come into contact with�the road when the rear brake is applied if the securing bolts are to come loose.
Gas Gas recall: Improved locking split pins for the brake pad holding brackets in the front and rear brake calipers are available
Improved locking split pins for the brake pad holding brackets in the front and�rear brake�calipers�are available.�
Honda Motorcycles X-ADV750M and NSS750M recall: The harness may be pinched between the pillion step and the frame body
When the pillion step is assembled and the wiring harness is not correctly positioned the harness may be pinched between the pillion step and the frame body or between the luggage box and the…
Honda Motorcycles CB500XA, CB500FA, CBR500RA recall: Excessive grease was applied to the o ring of the reservoir piston
Within the ABS (Antilock Braking System) modulator excessive grease may have been applied to an O-ring.
Kawasaki W800, W800 Cafe, W800 Street recall: The exhaust pipe might be incorrectly secured
The exhaust pipe might be incorrectly secured.
Zero Motorcycles Sr/f recall: The rear rotor bolts were insufficiently torqued
The rear brake disc retention bolts on specific motorcycles were insufficiently torqued.
Ajs Motorcycles MODENA 125 recall: The rear brake and exhaust bracket may come into contact with the road when the rear brake is applied if the securing bolts are to come loose
The rear brake and exhaust bracket may come into contact with the road when the rear brake is applied if the securing bolts are to come loose.
Benelli TRK502 and TRK 502 X recall: The rear shock absorber could suffer oil leakage or structural breakage
The rear shock absorber could suffer oil leakage or structural breakage.
Ducati HYPERMOTARD 950 SP recall: The side stand could break at the weld
The side stand could break at the weld that joins the side stand tube with the upper forged section.
KTM 690 ENDURO R, 690 DUKE, 690 SMC-R recall: Damage of the gasket may affect the function of the clutch slave cylinder
Damage to the seal caused by deviations in assembly may impair the function of the clutch slave cylinder.
Husqvarna Motorcycles recall: Damage of the gasket may affect the function of the clutch slave cylinder
Damage to the seal caused by deviations in assembly may impair the function of the clutch slave cylinder.
Mutt Motorcycles recall: The rear brake caliper guide may fail whilst using the rear brake
The rear brake caliper guide may fail whilst using the rear brake.
Ducati MONSTER 1200 S/STD, MONSTER 1200 R, MONSTER 821 recall: Rear brake hoses installed may be subject to damage to the flexible plastic part
Rear brake hoses installed on a specific batch of bikes may be subject to damage to the flexible plastic part due to excessive exposure to heat.
Suzuki UH200 and UH125 recall: The fuel hose of the affected vehicles may have been manufactured larger than design specification
The fuel hose of the affected vehicles may have been manufactured larger than design specification.
Gas Gas recall: Vehicles may have incorrectly mounted brake pad holding bracket locking split pins
Vehicles may have incorrectly mounted brake pad holding bracket locking split pins.
Husqvarna Motorcycles recall: Vehiicles may have incorrectly mounted brake pad holding bracket locking split pins
Vehicles may have incorrectly mounted brake pad holding bracket locking split pins.
Husqvarna Motorcycles recall: Improved locking split pins for the brake pad holding brackets in the front and rear brake calipers are available
Improved locking split pins for the brake pad holding brackets in the front and rear brake calipers are available