
Northern Diver 275N Twin Chamber Life Jacket
The product has not undergone conformity assessment as PPE, it is not CE or UKCA marked and there is no Declaration of Conformity as PPE.
All UK Personal protective equipment ppe recalls and safety alerts, newest first, with the hazard, affected models and what to do next. 263 listed.

The product has not undergone conformity assessment as PPE, it is not CE or UKCA marked and there is no Declaration of Conformity as PPE.

The product has not undergone conformity assessment as PPE, it is not CE or UKCA marked and there is no Declaration of Conformity as PPE
The product presents a risk of injuries as it failed a Penetration Resistance Test for whole footwear with non-metallic anti-penetration inserts.

Regulators containing a potentially defective 1st stage body presents a serious risk of drowning. A variation in the manufacturing process of the 1st stage regulator has been identified, which results in a thinner wall…

Internal quality testing of TR-6580E filters, labelled as suitable for storage between -30⁰C /+50⁰C, demonstrated that this product does not meet the performance requirements of the relevant standard, when subject to the temperature range…

The product presents a serious risk of injuries due to the absence of independent conformity assessment to demonstrate the product will perform when required.

The product presents a serious risk of drowning due to the absence of independent conformity assessment to demonstrate the product will perform when required.

The product presents a serious of injuries as Ridgegear Ltd found evidence of cracked brake discs, only in RGA5 fall arrest blocks manufactured in 2021.

The product presents a risk of injuries due to a product fault that, under certain circumstances, may allow the swivel assembly to unscrew and subsequently part, which presents a risk of injuries to consumers.

The dump valve pull cord on the specified BCD jackets were identified as being too short and could cause an issue to the end user. When the BCD is fully inflated the cord retracts,…

The product presents a serious chemical risk as presenting as Honeywell has determined that some of the notified products do not meet Honeywell’s high-quality standards and also do not meet applicable regulatory standards of…

The product presents a high risk of drowning as it does not provide adequate thermal protection for diving in cold water. If used for this purpose, the user could experience cold incapacitation leading to…
The products do not meet the requirements of the relevant regulations and show no demonstration of having been conformity assessed.

The impact absorption capacity of the helmet is insufficient. In the event of an impact, a child may suffer head injuries.
The vests present a high risk of injuries as the shock absorption thresholds were exceeded by 2-3 times, meaning that users may not receive sufficient protection in the case of a fall or injury.

The product presents a risk of injuries due to a risk of breakage that could cause a user to fall.

The product presents a risk of injuries as it is possible for the thread to break off just behind the nut.

Affected products have a malfunction whereby the carabiner’s gate stays open and no longer closes automatically, that could cause injuries.

Product presents a serious risk of asphyxiation due to restriction of gas flow to the diver.

Product presents a risk of injuries as the due to an unstable cable.

The product presents a serious injuries due to not passing the penetration resistance test. The physical failure of the trainer from impact or penetration can lead to potentially serious injuries to the foot or…

This product poses a risk of drowning because the harness may detach from the boat.

The product presents serious risk of asphyxiation due to dual tank restricting flow of gas to the mask and diver.