Mercedes Benz Actros Range, Arocs, Antos recall: Steering shaft may not be to specification
Yes – some of these vehicles are being recalled
- What's wrong
- Due to an error in the manufacturing process the lower steering shaft universal joint may not have been produced to the correct specification. Under heavy steering forces it is possible for the column shaft to move within the universal joint connection.
- What to do
- Contact a Mercedes Benz dealer to book the free repair. Check dimensions of the universal joint and column shaft and replace where necessary.
Source: Driver and Vehicle Standards Agency (DVSA)
Check your reg on DVSA ↗
What’s wrong
Due to an error in the manufacturing process the lower steering shaft universal joint may not have been produced to the correct specification. Under heavy steering forces it is possible for the column shaft to move within the universal joint connection.
The fix
Check dimensions of the universal joint and column shaft and replace where necessary.
Vehicles affected
| Model | Built from | Built to | Vehicles |
|---|---|---|---|
| Actros Range | 25 May 2016 | 17 Nov 2016 | 792 |
| Arocs | 25 May 2016 | 17 Nov 2016 | 792 |
| Antos | 25 May 2016 | 17 Nov 2016 | 792 |
How to check your vehicle
Use the official DVSA checker with your registration number to see if your exact vehicle is included. If it is, the manufacturer should have written to the registered keeper. The repair is free, even if you bought the vehicle second-hand.
Updated 14 September 2017. This page summarises an official notice. Details can change – always follow the official notice.