Mercedes Benz E-class recall: Steering column switch module may become inoperative
- What's wrong
- It has been identified that the lever used to select the drive range on the steering column switch module may become inoperative due to possible damage of a circuit board. In the event of this fault occurs then manual selection of the drive range (D…
- What to do
- Contact a Mercedes Benz dealer to book the free repair. Recall all affected vehicles to replace the steering column switch module.
What’s wrong
It has been identified that the lever used to select the drive range on the steering column switch module may become inoperative due to possible damage of a circuit board. In the event of this fault occurs then manual selection of the drive range (D R N P) would no longer be possible. The Auto-P function as well as the automatic parking brake will still be available as intended. During manoeuvring the vehicle may not change the drive range as intended by the driver when operating the selector lever during standstill. This could result in an increased risk of a collision/accident.
The fix
Recall all affected vehicles to replace the steering column switch module.
Vehicles affected
| Model | Built from | Built to | Vehicles |
|---|---|---|---|
| E-class | 1 Jul 2016 | 31 Jul 2016 | 3 |
How to check your vehicle
Use the official DVSA checker with your registration number to see if your exact vehicle is included. If it is, the manufacturer should have written to the registered keeper. The repair is free, even if you bought the vehicle second-hand.
Updated 15 March 2017. This page summarises an official notice. Details can change – always follow the official notice.