Mercedes Benz GLE and Ml Class recall: Threaded connection of the right rear seat belt end fitting may fail in a collision
Yes – some of these vehicles are being recalled
- What's wrong
- Due to a deviation in the manufacturing process the retaining bolt for the right rear seal belt may not have been tightened to the correct specification. In the event of a collision the belt may fail.
- What to do
- Contact a Mercedes Benz dealer to book the free repair. Where necessary rework threaded connection tighten securing bolt to correct specification.
Source: Driver and Vehicle Standards Agency (DVSA)
Check your reg on DVSA ↗
What’s wrong
Due to a deviation in the manufacturing process the retaining bolt for the right rear seal belt may not have been tightened to the correct specification. In the event of a collision the belt may fail.
The fix
Where necessary rework threaded connection tighten securing bolt to correct specification.
Vehicles affected
| Model | Built from | Built to | Vehicles |
|---|---|---|---|
| GLE | 1 Apr 2015 | 31 Aug 2015 | 54 |
| Ml Class | 1 Apr 2015 | 31 Aug 2015 | 54 |
How to check your vehicle
Use the official DVSA checker with your registration number to see if your exact vehicle is included. If it is, the manufacturer should have written to the registered keeper. The repair is free, even if you bought the vehicle second-hand.
Updated 18 July 2016. This page summarises an official notice. Details can change – always follow the official notice.