Toyota Proace recall: The possibility that the engine timing belt may wear out prematurely
The possibility that the engine timing belt may wear out prematurely.
Is there a recall on your Toyota? Check every DVSA safety recall for Toyota vehicles (250 since 1993) by model and year, with what's wrong and the free fix. 166 listed.
The possibility that the engine timing belt may wear out prematurely.
The pre-crash brake assist function can be delayed.
The inside of the high-pressure fuel pump may be worn or damaged over time during operation.
Due to an inappropriate software the Skid Control ECU may not complete all its processing tasks.
A possibility that the Exhaust Gas Recirculation (EGR) cooler could develop an internal coolant leak
On affected vehicles the strength of the brake booster piston could degrade.
The fuel tank in the subject vehicles may not have been welded properly and could leak fuel.
On affected vehicles some rear inner seat belts may have incorrect stitching on the belt material.
There is a possibility that the centre rear seat belt may be damaged a sharp edge of the bracket.
A possibility that a bolt of the brake pedal bracket may not have been torqued correctly.
There is a risk that the rear seat rail lock might not function as designed
It may not be possible to switch headlights from high beam to low beam or low beam to high beam.
The absorption of moisture into the driver�s airbag propellant could lead to slow deployment or inflator rupture
On affected vehicles the low pressure fuel pump located in the fuel tank could become inoperative.
The front lower suspension arms may have cracks on some portions of its surface.
Under certain circumstances the hybrid unit may shut down and cause loss of motive power.
There is a possibility that several fixations on the rear axle component were not tightened correctly.
An improper assembly of the electrical contacts in the reminder switch for the driver seat belt
Possible improper adjustment in the webbing sensor locking mechanism during assembly
A loss of injector sealing and resulting in fuel leakage.
The rear brake tube may become damaged over time due to movement between tube and holding clip on the lower suspension arm.
There is a possibility that the parking brake was manufactured with a shaft outside of specification
The fuel tube may become damaged due to movement between the tube and ribs on the urea tank.
There is a possibility that some seat belt fixation bolts and/or ground cable bolts were not tightened correctly.