All UK Cars, vans & lorries recalls and safety alerts, newest first, with the hazard, affected models and what to do next. 4,358 listed.
The turbocharger oil pipe ferrule material may have cracked during its forming process. In this condition there is a risk that the oil pipe may lose its sealing resulting in the leakage of oil…
The mounting screws of the belt guide brackets at both the left hand and right hand C-Pillars may not have been tightened correctly. Therefore the seat belt/s may not perform as intended increasing the…
On 'B' Class models fitted with 'Easy Vario' rear seat option a bolt securing the seat bench to the body may have been omitted during production. This may allow the seat bench to lift…
On certain vehicles fitted with 9 speed transmission the back up battery may not connect during main battery failure. This may prevent selection of Park on the transmission or operation of the electronic parking…
The stitch spaces on the front seat back trims may be incorrect and tearing strength of the trim can be higher than normal. In the event of a collision it is possible that the…
On certain vehicles the Restraints Control Module may have been incorrectly connected. As a result the driver's seat belt pretensioner may not deploy
The spacer clips on the flexible fuel lines in the engine compartment may become displaced or fall out.This could cause he fuel lines to chafe against each other and become damaged.
Incorrect fuel pump seals were provided to all markets as Aftersales (AS) service parts for the Subject Vehicles. There is a possibility that some of them were used for the replacement and/or repair. In…
On affected vehicles the fuel tank outlet flange mounted in the tank may be cracked. This can lead to fuel odour and/or fuel leakage. This may ignite in the presence of an ignition source.
Continued exposure to high levels of absolute humidity may cause the driver�s front airbag inflator housing to rupture and deploy abnormally in the event of a crash necessitating deployment of the driver�s front airbag.…
On certain models with road-railer conversion it is possible that in combination with the tyres MITAS 275/90 R22.5 SRT preliminary damage to the tyres may occur due to intensive rail usage. As a result…
On affected vehicles the rear side members may not have been correctly constructed. This could compromise seat belt operation during a collision.
The beach seat base mounting screws may break when the bench is repeatedly repositioned to allow a flat load area. Should this happen a noise will be heard from the bench. In exceptional cases…
The bolt securing the passenger seat back rest may fracture. If this happens the back rest cushion may drop. In the event of a collision the seat belt may not fully restrain the passenger…
The mounting nut for the battery ground line at the body may not have been tightened correctly. If the connection is loose there could be sparks and localised heating which increases the risk of…
Due to incorrect assembly the driver's airbag may not fully deploy during certain high speed collision conditions.
Water ingress to the relay on the electrical vacuum pump may cause a short. In extreme instances this may lead to fire.
The torque sensor of the electric power steering assistance may be damaged which can adversely affected the tightness of the housing and allow water ingress. The defect could lead to failure of the torque…
Due to insufficient coating during manufacture the drive-shafts) may corrode and fracture. In the event that the drive-shaft is fractured the vehicle loses drive but steering and braking will be still be available.
The airbag computer (ECU) incorrectly interprets the data provided by the lateral shock sensors and can reverse it. In the event of a side impact that is severe enough to cause side air bag…
Three vehicles have been built with extended chassis/wheel base. The Yaw sensor has been displaced to a spot which does not correspond to the specific location and position. It cannot be ruled out that…
Aluminium reference plates become loose could overtime separate from the vehicle while driving and hit following traffic causing a risk of accidents or personal injury.
On vehicles with multi layered paint it is possible the layers may not have bonded as intended. This could allow the windscreen to detach in the event of excessive forces such as an accident.…
The tightening torque of both hood primary latch bolts may not be to specification and cause the locking function of the hood to not work correctly. The loosening of the hood latch screws under…