Daimler Buses eCITARO recall: Bevel Gear installed with Wrong Ratio
The wrong bevel gear may be installed on the front axle steering. The required gear ratio for HD HDH SHD RHD and Intouro is 1.117:1. A Bevel gear with ratio of 1:1 was installed.…
All UK Cars, vans & lorries recalls and safety alerts, newest first, with the hazard, affected models and what to do next. 4,358 listed.
The wrong bevel gear may be installed on the front axle steering. The required gear ratio for HD HDH SHD RHD and Intouro is 1.117:1. A Bevel gear with ratio of 1:1 was installed.…
On vehicles equipped with the B2E electrical/electronic architecture and the ICUC Gen6 instrument cluster certain status and fault messages are not consistently displayed to the driver in the ICUC. The root cause is an…
On the affected vehicles the main front wiring harness may contact a metal ground stud due to a design change resulting in a possible loss of electrical vehicle functions and in rare cases a…
On affected vehicles a software defect in the instrument cluster may prevent the cluster display from switching on when the vehicle is started resulting in a black screen.
On affected vehicles a software defect in the instrument cluster may prevent the cluster display from switching on when the vehicle is started resulting in a black screen.
On affected vehicles a software defect in the instrument cluster may prevent the cluster display from switching on when the vehicle is started resulting in a black screen.
On affected vehicles there is a possibility of the rear doors being unable to open from either the inside or outside of the vehicle.
On affected vehicles the speed limit of 70 mph is not implemented as described in the technical data and stated in the vehicle registration document.
On affected motorcycles under certain riding conditions the rear brake caliper may be subjected to excessive stress which in the worst case can lead to the rear brake caliper breaking.
On affected motorcycles under certain riding conditions the rear brake caliper may be subjected to excessive stress which in the worst case can lead to the rear brake caliper breaking.
On affected vehicles the seat belt webbing may not be connected correctly to the vehicle's load-bearing structure meaning it would not be able to restrain the occupant in the event of an accident.
As part of our continuous product monitoring we have identified that due to insufficient contact pressure from the front turn signal indicator socket inside the headlamp unit loss of contact may occur during driving…
As part of our continuous product monitoring we have identified that the affected vehicles were delivered with a faulty batch of parking brake actuators the movement of which may be restricted due to dimensional…
As part of our continuous product monitoring we have identified that a defined production batch of the link rod for the upper supporting joint has not acquired the required material hardness in the production…
On some vehicles the Electronics Stability Control (ESC) warning light and the relative warning message may appear on the Instrument Panel Cluster (IPC) and the ESC may deactivate. In the worst case the vehicle…
The hoses at issue are professional B2B aftermarket replacement parts for commercial trailers i.e. heavy commercial vehicles (i.e. not passenger cars). If used as trailer brake hoses depending on the brake hose connection and…
On a specific batch of vehicles the drivers seat wiring harness may not have been routed correctly which over time may cause it to wear or become damaged. This may stop the seat adjustment…
Front & 2nd row (left & right side) seat belt retaining bolts are not correctly fastened on some vehicles. If affected the seat belt restraint is compromised and there is a chance of an…
Due to changes in production some areas have uneven material and strength to improve the bonnets outer appearance. As a result if the vehicle impacts a pedestrian the risk of injury may be higher.
Affected vehicles may have an issue with the fuel lift pump that could cause the engine to stall.
It has come to our attention that your vehicle is part of a very small number of smart #5 vehicles of which under very specific circumstances the braking software may underperform and lead to…
On affected vehicles the B-pillar label displays the Vehicle Identification Number but the fields for mandatory vehicle weight information may be blank.
Symptom 1 The speedometer is fixed at 0 MPH.2 The speed unit and odometer characters are not displayed.3 ENG cannot start due to software issue. Cause The meter startup/shutdown program is incorrect as a…
Affected vehicles may have an Electronic One-Way Clutch Assembly built with an unseated snap ring which may lead to a sudden and unexpected loss of forward or reverse movement.