All UK Cars, vans & lorries recalls and safety alerts, newest first, with the hazard, affected models and what to do next. 4,358 listed.
On imported Audi vehicles previously used in a warm climate zone and fitted with TAKATA driver airbag manufactured within a specific period it is possible that the gas generator housing may cause small metal…
Due to insufficient laser welding of the camera case at the supplier during a specific production period there is a possibility that the camera case may separate when exposed to external stress over time…
Due to insufficient laser welding of the camera case at the supplier during a specific production period there is a possibility that the camera case may separate when exposed to external stress over time…
On affected vehicles the red battery terminal cover can be damaged if the seat is not correctly mounted. A damaged or an improperly seated battery terminal cover may result in an exposed positive (+)…
On affected vehicles due to exposure to radiant heat from the exhaust manifold the turbocharger oil feed pipe and hose assembly may deteriorate over time this could cause an oil leak.
On motorcycles fitted with the accessory Vario side cases it is possible the locking catches for the lid do not engage and the lid is not securely locked. In this circumstance the lid may…
On affected vehicles the EM40 and EM55 vehicle battery ‘in’ (VB IN) connector can overheat and in certain circumstances fail losing all power to the unit with the possible loss of all rear road…
Due to the programming of the forward recognition camera software there is a possibility that the memory inside the forward recognition camera could fail during processing when the ignition is turned OFF. If this…
Due to the programming of the forward recognition camera software there is a possibility that the memory inside the forward recognition camera could fail during processing when the ignition is turned OFF. If this…
On certain vehicles the hose fitted onto the quick connector of the fuel feed line may not have been assembled to manufacturing specification and may become loose while operating under pressure.
Affected vehicles may have been equipped with the incorrect rear springs which can result in impaired driving behaviour when fully loaded or a risk of rear spring detachment in a worst-case scenario when empty.
Affected vehicles may have been equipped with the incorrect rear springs which can result in impaired driving behaviour when fully loaded or a risk of rear spring detachment in a worst-case scenario when empty.
Affected vehicles may have been equipped with the incorrect rear springs which can result in impaired driving behaviour when fully loaded or a risk of rear spring detachment in a worst-case scenario when empty.
On affected vehicles the housing of the rear axle transmission might not meet the strength requirements.
On affected vehicles a fault relating to the software that controls the engine / electric motor clutch may prevent the clutch from re-engaging after braking is carried out.
On affected vehicles there’s a possibility the upper trailing arms on the nearside front axle do not meet required specifications. If this is the case the trailing arm may break.
On affected vehicles the seat mechanism of the front left seat may not have been manufactured within accordance to specifications It is possible that an incorrectly sized rivet was used during production. As a…
On certain trailers the welds are breaking allowing the unit to move resulting in the inserts being pulled freeing the unit from its mountings. Or the inserts are pulling out loosening the remaining fasteners…
On certain trailers the welds are breaking allowing the unit to move resulting in the inserts being pulled freeing the unit from its mountings. Or the inserts are pulling out loosening the remaining fasteners…
On affected vehicles it is possible that the three-point belts of the rear seat belt system were not fitted according to the specifications. If this is the case the restraint function for passengers in…
On affected vehicles there is a possibility of abrasive wear of the fuel supply line. This can cause one or several possible effects: Fuel odour in the passenger compartment High fuel consumption Fuel leak…
On affected motorcycles the rear tyre can develop cracking or other deformation of the tyre tread under higher-speed operation conditions. In the worst case under continued use portions of the tyre tread may separate…
A small number of Ranger vehicles that have been manufactured with an incorrectly assembled engine idler gear. An improperly installed engine idler gear may cause an engine stall with sudden loss of power whilst…
Affected vehicles fitted with 1.9 RZ4E engines may under very specific driving conditions experience engine management control that may result in temporary emission irregularities.