Royal Alloy GP125 and GT125 recall: A front brake pad may dislodge under braking
The brake pad could detach from its retaining clip and fall away from the brake disc
All UK Motorcycles recalls and safety alerts, newest first, with the hazard, affected models and what to do next. 337 listed.
The brake pad could detach from its retaining clip and fall away from the brake disc
The front brake pads could have potential issues involving detachment of brake pad friction material from the back plate.
Corrosion due to salt may cause brake bind.
The friction material might separate from the plates of the brake pads due to a non-conformity.
Brake pad material may detach from the back plate.
Brake pad material may detach from the back plate.
Water can accumulate in the Bowden cables for the throttle valve during intensive cleaning or longer rainy trips.
A misrouted front brake hose may damage ignition switch wiring.
The engine output shaft bearing may not have had adequate initial lubrication during assembly
The gear position switch may provide an inaccurate signal.
A possible material nonconformity of the rear brake line
The material of the pivot pin which connects the swinging arm to the rear bevel gear does not have the correct quality
An electrical defect may exist on Indian Motorcycle MY 2014 resulting in the unexpected loss of forward lighting.
The contact terminal for the Horn and Starter switch has been improperly coated and may fail.
A brake hose has a possibility to wear by rubbing to horn lead wire.
A Brake hose may touch the front fork outer tube and could wear out.
The main stand strength is insufficient.
A side stand spring may fracture with the stand leg in its rest (up) position
The Gear Change Linkage may become loose from the ball joint
The strength of the rear carrier is insufficient to accommodate its maximum payload.
Abnormal corrosion may occur in the brake calliper the G 310 and C 400 models.
A possible non-conformity with the supplied side stand
Motorcycles may have 10A circuit breakers that do not meet quality standards
0il can leak from the rear bevel gearbox on to the rear tyre