Every UK recall and safety alert for BMW products, with what's wrong, which models or batches are affected and what to do. Updated automatically. 51 listed.
On affected vehicles the screw connection for the luggage lashing rails may not withstand the forces in situations of a rear end impact. This may result in the lashing rail to not crumple as…
On affected vehicles the screws connecting the front end to the vehicles body may have been tightened to a torque level lower than required.
For the affected vehicles the fabric of the passenger airbag may have been damaged during handling for airbag assembly.
On affected vehicles the brake servomotor was improperly welded. The weld seam might not withstand the stresses caused under high brake pressure leading to a requirement for a higher brake effort increasing the braking…
Affected vehicles may have had a retrofit or conversion of the airbag using a previously recalled airbag variant which if deployed may do so with excessive force causing sharp metal fragments to be released…
On affected vehicles there may have been a deviation in the production of the double universal joint on the steering column. Certain steering movements could result in the component failing.
On certain vehicles the passenger airbag may not have had the seam sewn according to the specifications.
On affected vehicles the screw connection for the luggage lashing rails may not withstand the forces in situations of a rear end impact. This may result in the lashing rail to not crumple as…
On certain vehicles the Integrated Brake (IB) system may be impaired due to contamination between electrical contacts.
On affected vehicles the starter motor may be overloaded due to repeated lengthy attempts to start the engine as the software based overload protection is not sufficient.
On affected vehicles the seat mechanism of the front left seat may not have been manufactured within accordance to specifications It is possible that an incorrectly sized rivet was used during production. As a…
On affected vehicles the welding of the recliner adjustment on the backrest of the left front seat may not have been performed to specification potentially resulting in insufficient locking of the backrest.
On affected vehicles in the owner’s manual the maximum permissible limits of the vehicle regarding weight data/additional load values that are specified are stated too high
On affected vehicles during production excessive force may have been applied to the rear left hand side chassis longitudinal beam which could lead to it cracking and affecting its structural strength.
On affected vehicles the hall sensor in the driver and passenger front seat belt stalks may not have been correctly installed and it may indicate the seat belt is inserted correctly when it actually…
On affected vehicles overtime the aluminium screws can loosen or break on the adjustable variable camshaft timing (VANOS) units potentially resulting in engine emergency mode being activated.
On affected vehicles due to a potential bonding defect there is a risk of the tailgate external trim becoming detached
On affected vehicles a possible degradation due to age of the propellant tablets may lead to over aggressive combustion if the air bag is activated and cause the inflator body to rupture.
On affected vehicles an unexpected loss of hydraulic brake assistance may occur and may result in a different pedal behaviour under specific conditions an extended braking distance may be experienced and ABS/Stability control may…
On affected vehicles if faulty cell modules have been installed then a malfunction may occur in the high voltage battery
On affected vehicles the rear seat ISOFIX bracket may have been damaged during the production process and may allow the seat to detach in the event of an accident
On affected vehicles cylinder head cover may not be sufficiently shaped in a specific area hairline cracks or more serious leaks may occur due to vibration or heat.
On affected vehicles ingress of transmission fluid may occur to the integrated transmission control unit within the mechatronic module
On affected vehicles the three screws connecting the electric motor to the steering gear are potentially not fastened correctly.