Every UK recall and safety alert for Ford products, with what's wrong, which models or batches are affected and what to do. Updated automatically. 173 listed.
On affected vehicles the software repair for previous recall 24C06 may not have been delivered properly and certain warning chimes may not be audible.
Affected vehicles may have 12V batteries that have been incorrectly vented allowing any potential venting to be directed into the cabin.
Affected vehicles may experience corrosion that can weaken or detach the seatbelt anchor pretensioner cables for both front seats. A corroded pretensioner cable may not adequately restrain an occupant in a crash.
The software repair for a previous recall may not have been properly delivered to the vehicle. The underlying noncompliance specified in the recall still exists and customers will not receive a warning if there…
Affected vehicles may have High Voltage (HV) battery bolts that are loose which over time could lead to a loss of motive power. .
Affected vehicles could experience venting of the 12 Volt batteries. Customers may experience one or more of acid smell or smell of rotten eggs in the cabin hissing sound the battery visibly venting gas…
On affected vehicles rear brake drums (eDrums) may be missing the reaction block bolts or fitted with reaction block bolts which were not tightened correctly. Missing or loose bolts could result in wheel lock…
Affected vehicles may experience a fuel leak from the fuel rail due to a manufacturing defect.
On affected vehicles the high voltage battery may have some cells that could potentially develop a short circuit leading to a Stop Safely Now message and possible loss of motive power or battery thermal…
Affected vehicles may have been manufactured with a bench seat frame with a suspect weld due to a manufacturing defect. This could compromise the occupant restraint during a frontal crash potentially increasing the risk…
Affected vehicles may experience a delay in the activation of their automatic dipped-beam headlamps when ambient light drops for example when entering a tunnel due to incorrect Body Control Module (BCM) software
On affected vehicles information on safety instructions (location of emergency exits fire extinguishers and emergency hammers) is missing in the SYNC information screen.
On affected vehicles the correct tightening torque was not reached on some of the rear brake caliper anchor bolts during manufacturing. If one or both caliper mounting bolts are missing or fail the caliper…
Affected vehicles may not show the correct Homologation regulation on the Vehicle Identification (VIN) label.
A number of vehicles could potentially be affected by water ingress in the Body Control Module (BCM) leading to corrosion inside. Water ingress into the BCM may prevent exterior lighting components from functioning as…
On affected vehicles there is a potential software issue causing the rear-view camera not to function as intended.
On affected vehicles a fracture of the shock absorber's top bush eye ring may result in reduced ride quality and compromised handling.
On affected vehicles the cylinder head may have loose ball plugs. This condition may result in a rapid oil leak if a ball plug comes out of the cylinder head.
On affected vehicles a software problem may result in issues with the rear-view camera that reduce the driver’s view or with it remaining on after a reversing event.
On affected vehicles in the event of an unexpected 12V battery discharge the front door electronic latches retain their last lock/unlock status which could result in an unexpected lock out or lock in condition.
Affected vehicles could experience loss of brake boost and extended brake pedal travel and stopping distance.
Affected vehicles may have a ground connection where the correct tightening torque was not achieved during manufacturing. This may lead to the malfunction of specific features engine stalling and arcing with an increased risk…
On affected vehicles the left-side camshaft sprocket on the engine could fracture due to a manufacturing defect resulting in an engine stall.
On affected vehicles the remedy software for a previous recall may not have been installed correctly. In the event of a high voltage battery cell internal short customers may experience a battery power off…