
Vevor Wood Turning Lathe – Model MC1080
The product presents a serious risk as the earth stud was found to be unreliable, no declaration of conformity was supplied and the product supply voltage requirements are not compatible with the UK power…
UK recalls involving Fire: affected products, models and batches, and what to do if you own one. 694 listed.

The product presents a serious risk as the earth stud was found to be unreliable, no declaration of conformity was supplied and the product supply voltage requirements are not compatible with the UK power…

The product presents a risk of fire as the battery in the parent unit may overheat while the product is in use.

The product presents a serious risk of fire and explosion

The product presents a serious risk of fire and explosion as the internal and external build quality is poor.

The product presents the hazards of fire and chemical risk.

The product presents a high risk of burns and fire as the product is insufficiently earthed and not fitted with a compliant fuse.

The product presents a high risk of burns and fire due to poor internal and external construction allowing components to overheat and potentially ignite.

The product presents a risk of burns, fire and explosion as the earthing arrangements on the product were insufficient to protect the user and can allow the plug and other internal circuitry to overheat…

The product has been recalled as it has been identified that a small number of products were supplied in the UK which have not been tested against the relevant standards.

The product presents a high risk of fire as the pins on the device do not comply with BS1361-1.

The product presents a high risk of fire as there is insufficient creepage and clearance distance between the mains potential input circuits and low voltage output circuits.

The product presents a high risk of fire as the mains plug does not have sufficient earthing arrangements.

The product presents a high risk of electric shock and fire as the product is fitted with a euro plug and the travel plug adaptor is of a poor quality.

This product is CE marked but there is no evidence that the product has been conformity assessed.

The product presents a high risk of fire as the fuse was not supplied with any granular filler.

It has been identified that a small percentage (1.2%) of their SALVUS branded 1m and 1.25m angled micropoint gas hoses may have a missing pin from the 3-pin array that holds the male thread…

The product presents a risk of fire as the recess holding the tea light can drop during use.

The product presents a high risk of fire as the product’s fuse is insufficient.

The product presents a serious risk of fire as the plug and fuse did not meet the requirements of the relevant standard.

The product presents a high risk of fire and electric shock as the transformer was of a poor build quality and did not meet the requirements for creepage and clearance. The product’s fuse did…

The product presents a risk of electric shock and fire as the pins on the device do not comply with BS1363-1. When tested with the relevant gauge, it was found that the lengths of…

The product has been identified as presenting a high risk of fire as a manufacturing fault can lead to the sleeving of the battery cable being damaged, allowing the product to short circuit.

The products incorporate an EMC filter. The EMC filter carries the maximum current during the wash cycle when the instantaneous water heater is on. In situations where the hand wash dryer is in continuous…

The product has been recalled as it was discovered that an improperly rated fuse for CAT III 600V applications was installed in the affected products.