Polaris SLINGSHOT 3-WHEEL MOTORCYCLE recall: Seat base frame may be defective
Driver-side and passenger-side seatbase frames may have been improperly manufactured Driver-side seatbase frames may also contain a seat slider defect.
All UK Motorcycles recalls and safety alerts, newest first, with the hazard, affected models and what to do next. 337 listed.
Driver-side and passenger-side seatbase frames may have been improperly manufactured Driver-side seatbase frames may also contain a seat slider defect.
When upshifting between first and second gear if the rider fails to engage second gear a neutral condition will exist continued opening of the throttle will cause high engine RPM. If the rider shifts…
If the brake fluid has not been changed as per manufacturer's instructions deposits may form which may affect the operation of the ABS module. Continued use may lead to loss of braking.
In the event that the airbag is activated it may overinflate due to overly aggressive combustion of the propellant. As a result the excessive internal pressure may cause the inflator body to rupture and…
The strength of some gears in the transmission may not be sufficient and could break if they receive excessive impact force during shifting. Drive could be lost and In the worst case the transmission…
Due to a deviation in the manufacturing process the fuel tank filler nozzle may leak. A modified version has been developed.
Certain riding styles can cause the engine to stall.
The distance between the packing holder and the filler of the fuel tank cap is unsuitable. If the tank cap packing becomes swollen and climbs over the filler sealing failure occurs. When the fuel…
A manufacturing defect exists in a production batch of front brake master cylinder components which MV AGUSTA has installed on a series of F4 RR and F4 RC model motorcycles. The defect in the…
Because of a manufacturing fault the floating piston in the front brake master cylinder may crack under high stress conditions typical of track use frequent ABS interventions or if a machine is dropped. This…
Because of a manufacturing fault the floating piston in the front brake master cylinder may crack under high stress conditions typical of track use frequent ABS interventions or if a machine is dropped. This…
Due to a manufacturing error water may enter a rear light wiring harness. This may cause corrosion and may adversely affect operation of the rear lights
Because of a manufacturing fault the floating piston in the front brake master cylinder may crack under high stress conditions typical of track use frequent ABS interventions or if a machine is dropped. This…
Cracks may appear on the side tubes between the engine mounting point and the lower cradle which could cause the frame to fail.
The front brake master cylinder piston when subjected to particular shock load and vibration conditions may fail and result in the failure of the front brake. This will lead increased braking distances.
A potentially defective rear wheel rim has been installed on some motorcycles. The rear wheel rim has spokes that may become loose and eventually cause the wheel to fail. If the spokes are loose…
The holes in the rear shock absorber tie-rod frame mounts can become elongated if the rear shock absorber bottoms out. This could cause the tie rod installation bracket to break.
On affected machines there is a risk of one of the link leads to the regulator rectifier developing an electrical short. A bracket introduced at the start of production may interfere with the link…
Indian Motorcycle has determined that some motorcycles equipped with halogen headlights may have been assembled using a non-compliant headlight not matching destination market requirements. Certain International models may be equipped with an SAE (North…
On affected machines there is a possibility that a bolt dropped into the air cleaner assembly during production could enter the throttle body preventing the decrease of RPM by throttle operation. On affected machines…
Insufficient torque of the CVT drive pulley securing nut. On affected machines this may cause an abnormal noise leading to the risk of engine stopping and crankshaft damage
Poor soldering to wiring of ignition switch leading to poor electrical conduction. This could cause the engine to stop while in use.
The screwed connection between the frame and the fixed bearing stud for the rear swinging arm may loosen. This results in the rear wheel not being kept aligned as required causing reduced rear wheel…
The countershaft 5th gear dogs used for engaging 3rd gear are broken. Although the material strength of the gear has been increased the fatigue strength was decreased due to the removal of shot peening…