Pfizer Limited, Accuretic 10/12.5 mg film-coated tablets
Pfizer Ltd are recalling batch number DD4842 as a precautionary measure due to the identification of a nitrosamine above the acceptable limit.
Every new product, food, vehicle, medicine and pet recall in the UK, newest first. Checked against official sources every 15 minutes. 9,006 listed.
Pfizer Ltd are recalling batch number DD4842 as a precautionary measure due to the identification of a nitrosamine above the acceptable limit.
Vehicles do not hold the necessary approval certification.
The presence of niacin and zinc may cause some customers to have an adverse reaction.
Exterior door handles might stay open and the door will not be locked.
A rotational speed sensor in the transmission could possibly chafe the electrical line.
The bolting on the brake caliper housing might not meet torque specifications.�
A particle in the fuel rail might lead to a leak between the fuel rail and the fuel injector.�
The presence of glass makes this product unsafe to eat.
In some vehicles within the range of specified VINs it is possible that they have engine design covers installed that could detach from their fixing depending on use (very sporty driving or poor road…
On affected vehicles engine compartment covers were fitted that regardless of use (very sporty driving style or poor road condition) and operating period could come loose from their attachment.
A software implausibility error in the HV �battery gateway� control unit may cause the contactors of all HV batteries to be opened unnecessarily.
Due to an improper ECU program vehicles may be affected by engine stalling or limited throttle response.
On affected vehicles engine compartment covers were fitted that regardless of use (very sporty driving style or poor road condition) and operating period could come loose from their attachment.
The design trim on the power unit can become detached from its retainers.
On certain vehicles the routing of an electric cable in the engine compartment might not meet specifications.
On certain vehicles the length of the wiring harness of the front wheel speed sensors might not meet the requirements.
The rubberised low-pressure fuel feed hose assembly may have been incorrectly routed during manufacture
Egg
The wiring harness for the horn may not be durable enough.�
The connection between the driver airbag and the occupant restraint controller may not been fully engaged.
The nuts on the 48V battery poles may not be torqued to specification.
Brancaster Pharma Limited have notified us of an issue relating to the label of the Water for Injections (solvent) packaged in each finished product pack.
Advanced Accelerator Applications is recalling specific batches of this product as a precautionary measure due to an out of specification result that was identified during stability testing.
The external door handle sliders might not be manufactured to the correct specification.