KTM 690 ENDURO R, 690 DUKE, 690 SMC-R recall: Damage of the gasket may affect the function of the clutch slave cylinder
Damage to the seal caused by deviations in assembly may impair the function of the clutch slave cylinder.
Car, van, motorbike and caravan safety recalls from the DVSA. 4,799 listed.
Damage to the seal caused by deviations in assembly may impair the function of the clutch slave cylinder.
Damage to the seal caused by deviations in assembly may impair the function of the clutch slave cylinder.
The current software does not provide sufficient NOx monitoring to confirm that the legal requirements on NOx emissions are met.
The current software does not provide sufficient NOx monitoring to confirm that the legal requirements on NOx emissions are met.
With an active EBS DTC EBS yellow tell-tale is displayed instead of EBS red tell-tale.
The Certificate of Conformity (COC) paper and Customer Information File (CIF) contains the incorrect information.
Engine management software could cause the oil/vacuum pump to become damaged.
The current software does not provide sufficient NOx monitoring to confirm that the legal requirements on NOx emissions are met.
The belt tensioner arm may have been manufactured with borderline tolerance.
On vehicles with TAKATA driver airbag and NADI gas generator manufactured within a specific period it is possible that the function of the driver airbag may be restricted due to its age.
The screw which secures the ground cable of the 48v battery may not be fully secured.
The screw connection of the pressure input rod of the brake booster may not have been tightened according to regulations.
On vehicles with 3-spoke steering wheel manufactured within a specific period the function of the driver airbag may be restricted due to its age.
With temperatures below zero the door lock Bowden cables can freeze.
With temperatures below zero the door lock Bowden cables can freeze.
Electrical cables may be improperly routed or mounted within the front swivel-seat frames.
The communication module might not meet specifications.
The communication module might not meet specifications.
There may be an insufficient or missing welding connection in the Hydraulic Unit of the Brake System.
The carrier side parts installed on the rear axle during a certain period may not meet the required specifications.
The middle fastening of the roof rail could come loose.
The behaviour of the emergency call system might not meet specifications.
The welding of the rear suspension spring holder on the underbody of the vehicle may not be to specification.
The bonding of the windshield might not meet specifications.