
MDHL Lithium Battery Car Pressure Washer
The product presents a high risk of electric shock as hte plug face and pins do not meet the dimensional requirements of BS 1363.
UK recalls involving Electric shock: affected products, models and batches, and what to do if you own one. 271 listed.

The product presents a high risk of electric shock as hte plug face and pins do not meet the dimensional requirements of BS 1363.

The product presents a serious risk of electric shock as the plug does not meet the dimensional requirements of BS 1363.

The product presents a high risk of electric shock as the insulated shutter opening device (ISOD) pin is too long.

The product presents a high risk of electric shock as the internal connections may loosen over time, causing the fan to become live.

The product presents a serious risk of electric shock as the plug pins are too close to the periphery.

The product presents a serious risk of electric shock due to poor internal built quality.

The product presents a serious risk of electric shock as if used outside, rainwater could access live parts.

The product presents a high risk of electric shock as the internal connections are poor, with wires soldered directly to the battery connection terminals.

The product presents a high risk of electric shock as it has insufficient creepage and clearance distance between the primary and secondary circuits.

The product presents a high risk of electric shock as the ionizer is in close proximity to the metal grill.

There is no evidence that the product has been assessed using relevant UK conformity assessment procedures as a valid Declaration of Conformity was not supplied.

The product presents a high risk of electric shock as under fault conditions, accessible metal parts can become live.

The product presents a serious risk of fire and electric shock as the plug pins do not meet the dimensional requirements of BS 1363.

The product presents a high risk of electric shock as the transformer is poorly constructed and fails to meet the minimum creepage and clearance distances.

The product presents a high risk of electric shock as the transformer is of poor build and does not meet the required creepage and clearance distances.

This product presents a serious risk of electric shock due to insufficient creepage and clearance distance between circuits.

The product presents a serious risk of electric shock as there is insufficient creepage and clearance distance between circuits.

The product presents a high risk of electric shock as it has inadequate internal connections.

The product presents a serious risk of electric shock as it has inadequate levels of insulation.

The product presents a high risk of electric shock as it as it has inadequate insulation and insufficient creepage and clearance distance between the mains potential input circuit and low voltage output circuits.

The product presents a high risk of electric shock as the dimensions of the plug allow access to live parts.

The product presents a high risk of electric shock as it has inadequate overcurrent protection.

The product presents a high risk of electric shock as it is possible to access live parts through the socket outlets.

The product presents a high risk of electric shock as the manual indicates the base can be removed without unplugging the item.