Indian Motorcycle Company Indian Challenger recall: During assembly the engine output shaft bearing may not have had adequate initial lubrication
The engine output shaft bearing may not have had adequate initial lubrication during assembly
Every new product, food, vehicle, medicine and pet recall in the UK, newest first. Checked against official sources every 15 minutes. 10,432 listed.
The engine output shaft bearing may not have had adequate initial lubrication during assembly
The brake pedal mount could break during an emergency stop and cause a total loss of braking capacity.
The steering gear tie rod may not have been assembled with a required spherical washer
A possible material nonconformity of the rear brake line
The rear lower shock absorber mounting bolt might not be tightened to the correct torque setting
The 3rd brake light may not be correctly secured to the vehicle.
The tightening of some rear suspension fixings may not be correct to specification
Possible non-conformity of certain seals in the front wheel arches could lead to water ingress into the passenger compartment.
The tightening and positioning of the seat belt lower bolts may be incorrect.
The tightening of the seat belt fixings and of certain earth cables may not conform to specification.
A non-conformity of the rear brake callipers could reduce the efficiency of the parking brake
The fuel pipes under the body may have been damaged over time due to a relative movement between these pipes and their surroundings
The rear brake hoses may have been damaged over time due to inappropriate movement between these hoses and a clip.
Allergens: Sulphur dioxide and/or sulphites
Soya
Rosemont Pharmaceuticals Ltd has informed us of an error in the barcode and GTIN number of the label on the bottle of the below batches.
There may be increased pedal travel as a result of production tolerances
There is a possibility that the rear brake hose may become damaged due to relative movement between the hose and the holding clip.
The tightening of some rear suspension fixings may not be correct to specification.
Possible non-conformity of certain seals in the front wheel arches could lead to water ingress into the passenger compartment.
The tightening and positioning of the seat belt lower bolts may be incorrect.
The tightening of the seat belt fixings and of certain earth cables may not conform to specification
A non-conformity of the rear brake callipers could reduce the efficiency of the parking brake.
The fuel pipes under the body may have been damaged over time due to a relative movement between these pipes and their surroundings.