Mercedes-Benz recall: The software of certain communication modules may not meet specifications
The software of certain communication modules may not meet specifications.
Car, van, motorbike and caravan safety recalls from the DVSA. 4,259 listed.
The software of certain communication modules may not meet specifications.
The rear drive shafts may not fulfil the durability requirements.
The retractor of the three-point automatic seat belt on the front right seat may be faulty.
The mating surfaces of the propshaft flanges may be contaminated with paint.
A fuel pump relay which could operate intermittently or fail without warning.
Vehicles may have an engine cooling radiator air intake module sealing baffle missing.
A setting of the software parameter for the remote drive external parking brake request is set to an erroneous value.
In the event of an accident requiring the vehicle�s front passenger airbag to be activated the airbag might not inflate fully.
The dashboard might not meet specifications
Individual threaded connections at the vehicle's suspension might not be tightened to the specification due to insufficiently cut thread of locknuts.
Threaded connections of the upper control arms at the rear axle may not be tightened with the specified tightening torque.
Connecting rods that were not manufactured according to specifications may have been installed in the engines of the affected vehicles.
The ground connection of the passenger airbag might not meet specifications.
The engine control unit cannot detect an error of atmospheric pressure sensor.
Loss of torque of engine hood hinge screws may result in an unlatched hood.
The Evaporative Emissions Canister may be unable to absorb the necessary amount of fuel vapour during vehicle refuelling.
Due to incorrect type-approval data processing the manufacturer's plate (VIN plate) and registration document must be replaced.
Affected tyres may develop bulges or separations in the sidewall area of the tyre.
In some specific riding conditions a high heat could develop in the muffler causing the upper right hand vent grill to melt.
The front seat belt retractor may have been built with an improperly formed wave disc.
The passenger seat occupancy detection system does not currently meet the required standard.
The rear brake calliper may leak brake fluid into the housing of the electric parking brake.
The accelerator pedal may not have been mounted on the vehicle in accordance with the specification.
The seatbelt reminder is not displayed.