Car, van, motorbike and caravan safety recalls from the DVSA. 4,885 listed.
The threaded connection of the propeller shaft intermediate bearings at the underbody has not been verifiably documented in certain Sprinter vehicles.
The webbing sensor in the rear centre seat belt assembly could become inoperative.
Emission control levels may not meet specification
Two threaded connections that connect the left seat bases with the floor of the vehicle's body shell may not have been installed with the required tightening torque.
Possible reduced retention force of the Rear Door Child Lock switch.
Specific aspects of the calibration of the engine control system may not be to specification.
The fuel low pressure hose quick connect in the engine compartment could be subjected to temperatures above the design operating specification.
A steering tie rod with an earlier design configuration can become broken in the �kink� groove area of the rod.
The rear reflex reflector may detach from the motorcycle.
A correctly fastened seat belt could be detected as not fastened impairing the restraint system
The wiring harness for the front doors might not be routed appropriately.
The material of the turbocharger oil feed pipe may not meet specification leading to leakage.
The front lower suspension arms may have cracks on some portions of its surface.
The embossed lock symbol at the operating lever of the child safety lock at the rear doors might indicate the wrong locking status.
The control unit of the differential locking module might not meet the specification.
The bonding of the type label and/or the noise sign is not process-reliable.
Under certain circumstances the hybrid unit may shut down and cause loss of motive power.
It is possible that the camshaft bearing cap screws could come loose on the affected vehicles.
Possible crack of tail lift side arm profiles.
It may be possible that the suspension roller piston detaches from the axle.
The calibration of the occupant classification system for the passenger seat might not meet the specification.
The mounting of an argon gas line to generator of the inerter system might not meet specifications.
The wiring harness under the right seat of the second seat row might not be routed according to specification.
The material of two closure plugs on the engine might not withstand the maximum loads while driving.