Car, van, motorbike and caravan safety recalls from the DVSA. 4,885 listed.
A small number of vehicles may have an adhesive bond between the sunroof and the vehicle body which does not meet the specification.
When the vehicle is turned off if moisture enters the ABS module it could cause an electrical short.
The wheel arch liner on the front axle could touch and chafe the flexible brake hose.
The tightness of the quick connector of the fuel supply line may not be ensured.
The brake pedal deflects under braking pressure and contacts the Skid Plate which inhibits rear wheel braking performance.
The steering geometry could be incorrectly set due to an incorrectly calibrated setting rig in the manufacturing plant.
The steering geometry could be incorrectly set due to an incorrectly calibrated setting rig in the manufacturing plant.
Vehicles may not comply with specific emissions criteria.
The front brake pads could have potential issues involving detachment of brake pad friction material from the back plate.
Corrosion due to salt may cause brake bind.
It is possible that gear oil may escape due to a faulty welded joint on the gearbox oil line.
The friction material might separate from the plates of the brake pads due to a non-conformity.
The function of the driver airbag inflators can degrade due to air and moisture ingress.
Curtain airbags may have propellant which may have a humidity level higher than specification and in the event of a collision may not deploy correctly increasing the risk of injury.
The permanent + wire (30) of the GRIPTONE battery charging socket could rub through due to a sharp edge on a fixing bracket.
A welded connection of the gearbox oil pipe can cause a leak of gear oil.
Possible detachment of the fixed glass sunroof while driving.
Euro VI DPF replacements don�t currently have necessary type approval.
The roof spoiler can partially or completely detach from the vehicle.
The upper steering column bolt may not have been fitted.
The fixing of the front wing wheel arch trim does not conform to specification.
The fixing of the front wing wheel arch trim does not conform to specification.
Due to the incorrect calibration of the injection computer the fixed speed limiter is inoperative.
The bonding between the glass panel and the sliding roof frame might not meet specifications