Car, van, motorbike and caravan safety recalls from the DVSA. 4,885 listed.
The bolt connection of the steering�propshaft�to the steering gear may�not be tightened correctly in�production�or the hex socket fit bolt may be missing.
The behaviour of the emergency call system might not meet specifications.
Error in emission control readings.
The behaviour of the emergency call system might not meet specifications.
The behaviour of the emergency call system might not meet specifications.
A friction weld seam has been over torqued at the manufacturer of the steering propshaft and incorrect guide rings installed.
The connection of the gas lines of the inertisation system might not meet specifications.
Vehicles could be equipped with a front axle brake caliper carrier which could have been manufactured outside the specifications.
The after treatment injector pipe may crack and leak.
The corrosion protection of the high-voltage battery housing may not be sufficient.
The behaviour of the emergency call system might not meet specifications.
The behaviour of the emergency call system might not meet specifications.
The behaviour of the emergency call system might not meet specifications.
The behaviour of the emergency call system might not meet specifications.
The behaviour of the emergency call system might not meet specifications.
The behaviour of the emergency call system might not meet specifications.
A possibility that lock nuts were installed on the rear axle trailing arms that were not manufactured according to the required parameter field.
The front lower ball joint may not have been properly installed into the steering knuckle.
The screw connection of the power supply on the starter motor might not have been installed according to specifications.
Due to engine vibration the filament inside the headlamp bulb may fail in a short period of time
Possible incorrect or missing cotter pin on steered axle joint.
Vehicles may be equipped with portable fire extinguishers which may not be fitted with a lock nut on the strike knob.
Some valve guides could be subject to early wear
The left cushion connecting plate may be installed with the inside and outside surfaces reversed.