Car, van, motorbike and caravan safety recalls from the DVSA. 2,519 listed.
A manufacturing error of the tyres 195/50 R13 C (EAN 6953913155432) with DOT 4720 could lead to a loss in tyre pressure or a burst tyre.
The accessory roof rack for the Peugeot 508 saloon could detach from the vehicle if used to carry items other than a roof box.
The plastic logo on the steering wheel centre may shatter and project fragments into the vehicle interior during an air bag deployment.
Pressure in the fuel tank could cause the fuel level sender to indicate fuel in the tank when it could be empty.
Air bag inflators may not operate as intended
Diodes on the rectifier bridge of the alternator might fail.
The front seat software could result in trapping of a rear occupant�s legs.
Spare wheel carrier bolts not tightened correctly.
If there is an object in front of the vehicle the FCM camera system may incorrectly detect it as a pedestrian depending on road circumstances.
The airbag inflator might have a different airbag deployment performance than designed providing less protection.
Certain models may have a raised edge on the turbocharger at the oil supply line sealing surface which could result in an oil leak posing a fire hazard.
A bore in the universal joint on the steering shaft might not meet specifications.
The corrosion protection of the high-voltage battery housing in the area of the connections may not be ensured over the lifetime of the vehicle.
The fixation of the rear headrests might not meet specifications.
Vehicles may be equipped and fitted with the incorrect rear right brake caliper.
Poor performance of the fuel injection system due to a fuel contamination (not linked with a quality of the fuel itself).
The return hoses of the power hydraulics may not withstand the specified system pressure due to the aging process.
The passenger airbag deployment door integrated in the instrument panel facia contains an additional mesh layer.
The bolting of the high-voltage battery to the vehicle body in the luggage compartment might not meet specifications.
It is possible for the affected vehicles to display the warning message Drive control disturbed - Park vehicle safely in the instrument cluster.
The bolting of a side crash sensor may not meet specifications.
The screws securing the steering column to the steering gear may not meet� the required specifications on�affected vehicles.�
Nuts used for the rear axle snow chain installation may have wrong material hardness.�
It is possible that the brake pedal shaft could become detached from the pedal controls bearing mount.