Audi Q2 recall: Head restraint mounting may not be correctly welded to rear seat outer backrest frame
The mounting for the head restraint may not be correctly welded to the outer backrest frame for the rear seat.
Every new product, food, vehicle, medicine and pet recall in the UK, newest first. Checked against official sources every 15 minutes. 10,752 listed.
The mounting for the head restraint may not be correctly welded to the outer backrest frame for the rear seat.
It is possible that the latching connection on the wheel housing liner may fail.
A welded connection of the rear seat bench may not have been correctly performed.
Spoilage of the products. The products potentially present a risk to health because they have fermented and as a result pressure may have built up in the bottles which could cause them to explode.
An incorrect multiple fuse was installed in the electronics box.
There is a possibility that due to a manufacturing error there is a crack on the frame of the left front seat.
The incorrect upper control arm has been assembled on the left side.
The hand brake cable stopper may have been incorrectly formed in production and may fail.
There is a possibility that due to a fault in the production process there is a crack on the frame of the left front seat.
A welding stud on the main floor may not have been welded correctly
This product may contain pieces of hard plastic which makes the product unsafe to eat.
Milk
Possible involuntary elevation of the grp roof.
Ruptured flexible front brake hoses may occur from cyclic fatigue.
Sesame and nuts
Milk
Pharmaswiss Česka republika s.r.o. (an affiliate of Bausch & Lomb UK Limited) has informed us of a risk of Emerade product failing to deliver a dose of adrenaline from the syringe due to blockage…
It is possible that the latching connection on the wheel housing liner may fail.
Corrosion of fixing rivets can lead to the side step shade becoming insecure
Exhaust Catalyser coating missing
Possible Fuel leak from tank
A fuel tank that may not meet required material wall thickness specification
There is a possibility that due to a fault in the production process there is a crack on the frame of the left front seat.
Vehicles may not have had the rear spoiler properly attached