Peugeot 208 and 2008 recall: Brake Pressure Modulator Valve
On affected vehicles the Electronic Brake System Module is not according to specification which could potentially lead to light internal leakage of brake fluid.
Every new product, food, vehicle, medicine and pet recall in the UK, newest first. Checked against official sources every 15 minutes. 10,759 listed.
On affected vehicles the Electronic Brake System Module is not according to specification which could potentially lead to light internal leakage of brake fluid.
On affected vehicles the Electronic Brake System Module is not according to specification which could potentially lead to light internal leakage of brake fluid.
On affected vehicles the Electronic Brake System Module is not according to specification which could potentially lead to light internal leakage of brake fluid.
On affected machines footrests of an incorrect specification may have been fitted.
For affected vehicles there is an error in the specific software calibrations of the traction (high voltage) battery control unit. As a consequence a false detection of the battery cell voltage and/or the battery…
On affected vehicles a component in the electric motor could over time slowly degrade and eventually fail leading to the electric motor failing without notice and a loss of propulsion.
On affected vehicles improper installation of the fuel supply hose assembly during production may cause the fuel supply hose to come into contact with the fuel vapor hose assembly. In a worst-case scenario the…
On affected machines the power output of the Rectifier Regulator Assembly could cause the Back-Up Fuse to blow. If this occurs the engine may not start or may stall while the bike is in…
Mercedes-Benz has determined that on certain eSprinter model 907 vehicles the weld seam of a gearwheel inside the rear axle drivetrain might not meet strength requirements.

The product presents a serious risk of suffocation as it has a hood.

The product presents a serious risk of suffocation as the product has a hood.

The product presents a serious risk of suffocation as it has a hood.

The product presents a serious risk of suffocation as the sleeping bag has no arm openings.

The product presents a risk of electric shock and burns as a potential manufacturing defect may cause the products to overheat.

The product presents a serious risk of suffocation as the sleeping bag has no arm openings.

The product presents a serious risk of fire and electric shock as the transformer is of a poor build quality.

The product presents a high risk of electric shock as it is supplied with a 3-pin ‘clover’ style plug, which is unfused and does not meet the requirements of BS 1363 or BS 1362.

The product presents a serious risk of choking as it is supplied with a small part, and is inappropriately labelled.

The product presents a high risk of injuries as it is possible for the front pivot bolts assembled to the Vibrating Grizzly Feeder mesh deck to become loose or detached.
For affected machines the installation of certain accessory kits (Fairing Lowers and/or Inverted Forks) fitted on certain Model Year 2023 – 2025 Touring and CVO Touring machines may take the vehicle out of compliance.
For affected vehicles due to a software concern the calculated and displayed battery state of charge may rapidly fluctuate.
Affected vehicles may face a front seat belt pretensioner malfunction in the event of a crash due to the inversion of command wires in the Airbag ECU connector.
Barley (gluten) and sulphites
Milk