Every new product, food, vehicle, medicine and pet recall in the UK, newest first. Checked against official sources every 15 minutes. 5,706 listed.
As part of our continuous product monitoring we have identified that a defined production batch of the link rod for the upper supporting joint has not acquired the required material hardness in the production…
As part of our continuous product monitoring we have identified that the affected vehicles were delivered with a faulty batch of parking brake actuators the movement of which may be restricted due to dimensional…
As part of our continuous product monitoring we have identified that due to insufficient contact pressure from the front turn signal indicator socket inside the headlamp unit loss of contact may occur during driving…
The possible presence of Listeria monocytogenes in the products listed above.
The hoses at issue are professional B2B aftermarket replacement parts for commercial trailers i.e. heavy commercial vehicles (i.e. not passenger cars). If used as trailer brake hoses depending on the brake hose connection and…
On some vehicles the Electronics Stability Control (ESC) warning light and the relative warning message may appear on the Instrument Panel Cluster (IPC) and the ESC may deactivate. In the worst case the vehicle…
It has been identified that affected batches may be microbiologically contaminated.
On a specific batch of vehicles the drivers seat wiring harness may not have been routed correctly which over time may cause it to wear or become damaged. This may stop the seat adjustment…
The products present a risk to health as the sand inside the bottles may be contaminated with a small quantity of asbestos.
The product presents a risk of electric shock and fire as there is a fault within the oscillation mechanism that can damage internal wiring.
The product presents a serious risk of electric shock as the plug face does not meet the dimensional requirements of BS 1363.
The product presents a serious risk of electric shock because live parts are accessible by hand.
The product presents a high risk of electric shock as the foam base of the luminaire can be removed by hand without the use of tools, exposing single insulation mains wires.
The product presents a high risk of electric shock as the foam base of the luminaire can be removed by hand without the use of tools, exposing single insulation mains wires.
Due to changes in production some areas have uneven material and strength to improve the bonnets outer appearance. As a result if the vehicle impacts a pedestrian the risk of injury may be higher.
Front & 2nd row (left & right side) seat belt retaining bolts are not correctly fastened on some vehicles. If affected the seat belt restraint is compromised and there is a chance of an…
The product presents a choking hazard because the spout can detach from the lid, creating a small part which may obstruct a child’s airway.
The product presents a risk of injuries because it tipped over during stability testing. It also presents a risk of choking due to easily-accessible batteries.
The specific batches of this product sold by Next were found to be past their expiry date. This means that the suncream may not provide adequate protection, increasing the risk of sun-related skin damage…
The product presents a risk of entrapment because the machinery guarding interlock switches can be bypassed, allowing the machine to run with the guard open.
The product presents a serious risk of asphyxiation because if the product is swallowed in its hydrated form, it can block a young child’s airway.
On affected vehicles the B-pillar label displays the Vehicle Identification Number but the fields for mandatory vehicle weight information may be blank.
It has come to our attention that your vehicle is part of a very small number of smart #5 vehicles of which under very specific circumstances the braking software may underperform and lead to…
Affected vehicles may have an issue with the fuel lift pump that could cause the engine to stall.