Citroen C4 CACTUS recall: Bonnet striker may be insecure
The striker wire on the bonnet lining may not have sufficient support to prove it with the security for its intended purpose. This can lead to incorrect locking of the bonnet over time and…
Every new product, food, vehicle, medicine and pet recall in the UK, newest first. Checked against official sources every 15 minutes. 10,759 listed.
The striker wire on the bonnet lining may not have sufficient support to prove it with the security for its intended purpose. This can lead to incorrect locking of the bonnet over time and…
The screwed connection between the frame and the fixed bearing stud for the rear swinging arm may loosen. This results in the rear wheel not being kept aligned as required causing reduced rear wheel…
The vehicle sensitive locking mechanism for the front seatbelts may be incorrect causing either the belt not to lock or the webbing very difficult to pull out. If the locking mechanism does not function…
On affected vehicles the clip that retains the gearshift cables may not be fully engaged with the metal portion of the handbrake cable.
Due to a manufacturing issue with the front lower ball joint there is a possibility that the surface of the ball joint may be damaged while driving. If the vehicle is operated continuously the…
Strathclyde Pharmaceuticals Ltd is recalling a single batch of Xarelto 20mg film-coated tablets (Rivaroxaban) because of reports of rogue blister strips of 15 mg tablets within two packs of 20 mg tablets.
The frame of the machine may develop a crack. Should a crack develop as it gradually develops the steering and handling will get progressively worse. If not repaired the frame could beak rendering the…
The countershaft 5th gear dogs used for engaging 3rd gear are broken. Although the material strength of the gear has been increased the fatigue strength was decreased due to the removal of shot peening…
Due to possible loosening of the adjuster lock nut parking brake lever travel may become excessive and the parking brake may not be fully applied. If the vehicle is not parked in accordance with…
Affected vehicles may have received the wrong replacement airbag assembly through a previous recall. This replacement air bag may not deploy as intended.
The engine fuel return pipe is made of material which may adversely react with chemicals paint etc. These may cause the pipe to swell become loose and leak fuel.
The positioning of the starter supply terminal may be incorrect. This may allow it to foul other components and cause a short circuit.
If the retaining ring inside the steering gear has not been fitted correctly the sealing cap would not be fixed axially and might start moving. If the sealing cap has moved the ball return…
The flange nut can seize on the thread of the studs in the fuse box which could mean the terminals do not have the correct torque and may be loose. Electrical cables connected to…
Due to an error in the manufacturing process the lower steering shaft universal joint may not have been produced to the correct specification. Under heavy steering forces it is possible for the column shaft…
The bolts retaining the offside front leaf spring (or springs) and support bracket(s) may not have been tightened to the correct specification. If a support bracket disconnects this could affect the steering.
The tyre may develop an uneven shaped tread area which may affect tyre performance and vehicle handling.
The positioning of the starter supply terminal may be incorrect. This may allow it to foul other components and cause a short circuit.
The positioning of the starter supply terminal may be incorrect. This may allow it to foul other components and cause a short circuit.
Due to an error in the manufacturing process the lower steering shaft universal joint may not have been produced to the correct specification. Under heavy steering forces it is possible for the column shaft…
On affected machines carburettor float may stick causing a fuel leak.
On affected machines fuel may leak from the fuel tap when it is operated.
The clip-on handlebar is susceptible to Stress Corrosion Cracking. This can cause the part to fail during use and could affect control of the machine. The manufacturer recommends to immediately STOP using the clip-ons
The airbag initiator may be defective and may prevent the side airbag(s) and/or knee airbag deploying in the event of an accident. In a collision the airbags not deploying could put the occupants at…