Every new product, food, vehicle, medicine and pet recall in the UK, newest first. Checked against official sources every 15 minutes. 10,759 listed.
When connected to Jaguar Land Rover�s Symptom Driven Diagnostics (SDD) device and an update is unsuccessfully undertaken the calibration may default to a pre-set condition. In the event of a frontal impact of a…
Torrent Pharma (UK) Ltd is recalling the below batches as a precaution because out of specification results for dissolution were obtained during routine stability testing.
There is a possibility the clamp between the particle filter and the front exhaust pipe is not closed fully due to an unfavourable tolerance pairing.The particle filter could become detached from the exhaust pipe…
Some vehicles may have been manufactured with fuel tanks that do not meet Polaris quality standards. As a result the fuel tank may crack resulting in a fuel leak. A fuel leak in the…
Some vehicles may have been manufactured with wiring harnesses that may short to ground with no circuit protection.
Brake caliper assembly may be incomplete on the models referred to above due to deviations in manufacturing at our supplier. The anti-rattle plates and cotters may be missing. This may lead to problems on…
One or more of the front brake disc retaining screws may loosen. This may be identified by rattling and may affect the brake's efficiency. In extreme instances the brake disc could detach.
Due to incorrect wiring assembly the vehicles main power supply is disconnected after airbag deployment. This will affect the operation of vehicle safety functions such as automatically unlocking doors. The SRS systems are still…
Polaris Industries Inc. (Polaris) have issued a STOP ride and STOP sale notice on a small number of machines. These machines were manufactured with a fuel tank vent line end location in the headlight…
The hazard warning lamps wiring may not be of the correct length and can become damaged during steering operations. This may cause the hazard lamps not to work but will not affect the individual…
Due to a non confromity in production the headlamp auto aim function may not operate
Possible non-compliance of an internal component of the starter control relay could cause damage by overheating. This could cause unintended operation of the starter motor and in extreme instances; there is a risk of…
Possible non-compliance of an internal component of the starter control relay could cause damage by overheating. This could cause unintended operation of the starter motor and in extreme instances; there is a risk of…
Under certain conditions the oil feed pipe to the turbocharger may leak.Oil may contact hot components and there is a risk of fire.
A pipe to the power steering cooler may not be corrctly secured and may come adrift. This may cause a loss of power steering assistance.
A faulty accelerator pedal sensor may cause erratic accelerator operation during operation of the accelerator pedal.This may vary between no throttle reaction to a speed greater than expected for a throttle position
Surface finishing of brake hose retaining clip may be insufficient causing possibility of corrosion and failure of clip.
Depending on type of control unit fitted the antitrap protection device on inwards opening doors may not operate and objects could become trapped.
The Tyre Pressure Monitoring System (TPMS) on the affected vehicles was calibrated incorrectly and as a result does not illuminate the low tyre pressure warning tell-tale at the required minimum activation pressure.
Baxter Healthcare Limited are initiating a precautionary, company-led, ward-level recall of two batches of Sodium Chloride Infusion 0.9% w/v 1000 mL bags due to a potential leak with the bags.
The fixed fork tube can suffer preliminary damage due to unusual incidents with momentary high stress without the user noticing the damage. Through longer usage with high stress the pressed in seal plug can…
Some vehicles may have been manufactured with an incorrect driver seat wiring harness layout which can cause the seat wiring harness to rub against metal points on the seat/seat frame assembly through normal seat…
On vehicles with ABS/ESC the earth connection may be interrupted. This may cause failure of the ABS/ESC system.
Poor heat treatment to the camshaft gears may cause the teeth to break off and fall into the timing gear causing the engine to stop suddenly. This could increase the risk of collision.