Every new product, food, vehicle, medicine and pet recall in the UK, newest first. Checked against official sources every 15 minutes. 10,775 listed.
Cipla (EU) Limited, UK and Pharmathen S.A. have informed the MHRA that the outer carton (box) of the product batches mentioned in this notification are missing the medicines legal classification for a Prescription Only…
Product defect recall alert for Buprevet 0.3 mg/ml Solution for Injection for Dogs and Cats Vm 57446/4007 distributed by Virbac.
Affected vehicles equipped with the option BRM (carbon ceramic matrix brakes) may face a braking management issue due to unexpected control unit signals. This may potentially lead to a carbon ceramic disc rupture with…
A joint in the front suspension may have been incorrectly attached during the manufacturing process.
High levels of caffeine in the product listed above. Some of these products were found to contain levels of caffeine at levels that could be fatal.
These products contain soya making them a possible health risk for anyone with an allergy to soya
On affected vehicles The PBU (pressure valve) membrane in the high voltage battery pack may not be sealed due to incomplete ultrasonic welding. If the battery pack is completely submerged in water (i.e. water…
On vehicles manufactured in a specific period there is a possibility that four of the six welding points on the bottom connection of the impact beam for the rear left door are too small.
Certain vehicles may be fitted with a wheel support containing cavities in the material.
On affected vehicles the corrosion protection of the integral carrier of the front axle might not be sustained over the lifetime of the vehicle.
When the data is read out from the vehicle ECU an incorrect IUPR (In-Use Performance Ratio) value is shown. This does not comply with regulations however there is no impact on safety or vehicles'…
On affected vehicles due to an error in the software calibrations of the Engine Control Unit the Malfunction Indicator Light (MIL) will not illuminate when the urea injection system (which is part of the…
Affected vehicles may have been supplied with a charging cable that was not according to specification. The temperature sensor of the charger pin of the charging cable was incorrectly calibrated. As a result this…
On affected vehicles the oil supply for the rear axle drive shaft bearing might not meet specifications.
Subject vehicles may experience a loss of brake assistance and brake performance may be reduced.�
On affected vehicles the inflation of the front passenger airbag might not meet specifications.
The lollipop stick contains a sharp end inside the product which could be injurious to health.
The product presents a high risk of electric shock due to insufficient creepage and clearance distances which could cause the product to become live.
The product presents a risk of electric shock due to insufficient creepage and clearance distances which could cause the product to become live.
The product presents a high risk of electric shock due to insufficient creepage and clearance distances which could cause the product to become live.
The product presents a high risk of electric shock due to insufficient insulation.
The product presents a risk of electric shock due to insufficient insulation, which could allow the product to become live.
The product presents a serious risk of electric shock due to access to live parts.
The product presents a serious risk of fire/explosion due to insufficient earthing arrangements.