Every new product, food, vehicle, medicine and pet recall in the UK, newest first. Checked against official sources every 15 minutes. 10,759 listed.
An internal component of the passenger's airbag triggering module may not conform to specification. This could affect the triggering of the device in the event of an impact.
An internal component of the passenger's airbag triggering module may not conform to specification. This could affect the triggering of the device in the event of an impact.
The holes in the rear shock absorber tie-rod frame mounts can become elongated if the rear shock absorber bottoms out. This could cause the tie rod installation bracket to break.
It has been identified that in certain cases the driver is able to manoeuvre the vehicle with the middle door open without a visual or audible warning. Risk of the vehicle being driven with…
An incorrect specification driver or front passenger air bag assembly may have been installed during production. As a result the airbag(s) may not deploy as intended.
Caution in Use: Distribute to Hospital Pharmacy, Ward, Chemotherapy Unit and Clinic Level
The High Load parameter setting of the Electronic Braking System may not have been correctly programmed. In extreme instances this may affect EBS brake application and vehicle stability.
On affected machines there is a risk of one of the link leads to the regulator rectifier developing an electrical short. A bracket introduced at the start of production may interfere with the link…
A brake hose crimp connection could come loose and cause a reduction in braking effort.
Due to a deviation in the production process certain suspension and steering fixings may not have been tightened to the correct torque.
Due to a deviation in the production process certain suspension and steering fixings may not have been tightened to the correct torque.
Indian Motorcycle has determined that some motorcycles equipped with halogen headlights may have been assembled using a non-compliant headlight not matching destination market requirements. Certain International models may be equipped with an SAE (North…
Necessary technical acceptance not carried out by Porsche AG prior to sale of certain Porsche company cars. As a result one pre-owned vehicle does not comply to the latest standards and related quality standards.
Due to a software issue the Instrument cluster may intermittently go blank.
A steering shaft coupling may not have been correctly manufactured. This may create a clicking noise and the steering may become restricted.In extreme instances the steering may lock.
it has been determined that the upper steering shafts on 2016-2017 GENERAL Vehicles may exhibit movement along the length of the power steering spline. In extreme circumstances this movement may ultimately result in separation…
Insufficient torque of the CVT drive pulley securing nut. On affected machines this may cause an abnormal noise leading to the risk of engine stopping and crankshaft damage
On affected machines there is a possibility that a bolt dropped into the air cleaner assembly during production could enter the throttle body preventing the decrease of RPM by throttle operation. On affected machines…
The driver may experience sudden loss of power assistance to the steering due to voltage irregularities in the Electro Hydraulic Power Steering system. The driver will have to apply increased effort to steer the…
The propellant (ammonium nitrate) in the inflator of the drivers and passengers front airbag inflator may deteriorate due to high temperature and humid conditions over a longer period in use. As a result the…
A nonconformity of the windscreen wiper motor breather system could in some cases result in the entry of water and complete jamming of the motor due to internal corrosion.
Non-conformity of a tailgate strut internal component may allow corrosion to develop. This may cause the strut to fail and the tailgate may not be held open.
The right front seat belt pretensioner may not conform to specification . This may adversely affect it's operation in the event of an accident.
The rear seatbelt pre-tensioner ignitors may not perform as expected. This could increase the risk of injury to the seat occupants. The lock functions of the rear seatbelts are not impaired.