Jeep Cherokee and Renegade recall: Transaxle wiring has been incorrectly fitted
The transaxle wiring harness may have been built with insufficient wire terminal crimp(s). This may cause the transmission to select neutral.
Every new product, food, vehicle, medicine and pet recall in the UK, newest first. Checked against official sources every 15 minutes. 10,759 listed.
The transaxle wiring harness may have been built with insufficient wire terminal crimp(s). This may cause the transmission to select neutral.
The driver' s airbag clockspring may ingest dust. This may cause the airbag warning light to illuminate. It may also affect the air bag operation in the event of a collision.
It has been identified that due to corrosion there maybe a malfunction of the power supply within the Occupant Restraint Control (ORC) module. This could result in either an illuminated airbag warning lamp with…
A side panel that may contact the exhaust manifold.This may pose a fire hazard.
Strides Pharma UK Ltd, trading as Co-pharma, is recalling specific batches of Diclo-SR 75 Tablets as a precautionary measure
The steering column housing may crack making the steering wheel adjustment not as expected and/or some control arms may become difficult to use them (indicators headlight control wipers).
Abnormal deployment pressure may lead to rupture of the passenger's air bag inflator case. In the event of an inflator rupture metal fragments could be propelled into the passenger compartment
A fuel leak could occur at the retaining nut for the fuel sensor on the fuel tank which in adverse circumstances can lead to a potential fire risk. The loss of fuel from the…
Due to a possible contamination of the tooth segment the handbrake pawl may not latch correctly. This may cause the handbrake to disengage.
Incorrect passenger air bag detonators were installed during manufacturer. this may adversely affect the airbag's deployment in the event of an impact.
It has been identified that vehicles equipped with a single stage inflator driver�s front air bag then there is a possibility that the density of the propellant in the inflator could be reduced over…
It has been identified that due to a production issue there is the potential for the brake shoe web ends where they are located at the cam roller D slots to either break orfail…
Damage to the tyre structure could have occurred during the mounting of the tyre to the wheel. This can lead to severe tyre sidewall deformation and rapid deflation.
An an incorrect maximum permissible vehicle width was incorrectly defined on the Certificate of Conformity (COC) documentation. Due to this a customer installing a body conversion according to that defined on the COC may…
Due to an error in the manufacturing process the air bag and/or seat belt pretensioner may not trigger in the event of a collision
The rear brake hose could be incorrectly routed and chafe against other components. This condition could lead to the brake hose leaking fluid and the loss of performance at the rear brake.
The seat occupancy detector system may not be to the correct standard and the passenger's airbags may be deactivated
Due to insufficient strength of the gear shift rear shaft it could break off during use.
It has been identified there is a possibility that the bolt(s) securing the road wheel(s) may not have been tightened to the correct specification. This could result a risk that the road wheel rim(s)…
It has been identified there is a possibility one of the nuts fixing the brake pedal to the brake booster may not have been tightened to the correct specification. This could result in the…
There is a possibility that the bolts holding the steering valve on the steering rack are missing or have not been correctly tightened. This may affect control of the vehicle.
Some ground cable eyelets and/or the fixation of the airbag control unit may not have been tightened correctly. As a result there is a risk of various electrical malfunctions e.g. engine stall fire hazard…
There is a possibility that the bolts between the front shock absorber and knuckle have not been properly tightened. This may lead to breakage of the connection between the front shock absorber and the…
The seal between the fuel cap and fuel tank filler neck may not be installed correctly. As a result there is a risk of fuel leakage during driving or in case of vehicle rollover.…