Mercedes-Benz Vans Vito recall: Retaining ring of the front bearing may be incorrectly located
The front wheel bearing retaing ring may not be correctly fitted; this may allow the axle to float in the hub.
Car, van, motorbike and caravan safety recalls from the DVSA. 4,885 listed.
The front wheel bearing retaing ring may not be correctly fitted; this may allow the axle to float in the hub.
The front wheel bearing retaing ring may not be correctly fitted. this may allow the axle to float in the hub.
Possible fouling between fuel lines and the fuel tank shield may over time cause the pipes to wear and fail. Over an extended period of time fuel leakage may be noticed under the vehicle.
The welding of the towing eye in the vehicle tool kit may not be fail-proof and may detach if the vehicle is towed.
The bolts securing the seat belts to the B- and C-pillars on the left side of the vehicle may possibly not have been tightened to specification.
The catch bolt for the range change gearshift mechanism may work loose. This may affect gear changes and it is possible drive can be lost.
The welding of the towing eye in the vehicle tool kit may not be to specification. As a result the weld on the eye may fail during use causing loss of propulsion and the…
The welding of the towing eye in the vehicle tool kit may not be to specification. As a result the weld on the eye may fail during use causing loss of propulsion and the…
Exhaust gas temperatures may drop below the optimal operational level for the selective catalyst reduction affecting its efficiency when reducing nitrogen oxides.
Some fuel hoses were not manufactured to specification and as a result could crack and leak fuel. The fuel could affect the drivability of the subject vehicle and possibly others using the roads.
Some fuel hoses were not manufactured to specification and as a result could crack and leak fuel. The fuel could affect the drivability of the subject vehicle and possibly others using the roads.
Due to a non-conformity in the production process the electrical power steering (EPS) must be replaced. This will prevent a potential loss of steering assistance. Loss of EPS functionality could increase the risk of…
The DPS shaft may break causing a loss of steering control.
The steering column clock spring may break. This will cause warning messages to illuminate in the instrument cluster but in extreme instances it may cause the driver's airbag to deploy.
An incorrect surface treatment on the fuel filter collar may lead to breakage of the diesel filter strap resulting in vibration and noise from the engine compartment. In the case of any mechanical pulses…
A hose clip can damage the power steering return hose for the steering rack. The power steering hose can also contact the wheel housing. If the hose is damaged hydraulic fluid can discharge and…
In some circumstances when the right side front seat is operated to its fully reward position the seat runner can compress the battery supply cable and cause the seat to damage the battery supply…
Due to a communication error between the Engine Control Module (ECM) software and the Transmission Control Module (TCM) the transmission park pawl may not engage. In certain circumstances such as when the park brake…
The front brake master cylinder piston when subjected to particular shock load and vibration conditions may fail and result in the failure of the front brake. This will lead increased braking distances.
There is a risk that the brake booster water shield may be incorrectly installed. This may result in limited braking ability due to water ingress into the brake booster.
An engine component may not be to specification which could result in loss of engine performance. This may lead to the engine stalling and potentially causing an engine failure. In very unlikely circumstances the…
An engine component may not be to specification which could result in loss of engine performance. This may lead to the engine stalling and potentially causing an engine failure. In very unlikely circumstances the…
On the subject vehicles corrosion may form around the parking brake actuating shaft within the rear brake caliper. This could cause the handbrake to become difficult to operate (greater force required at the lever)…
The windscreen may not be correctly sealed in the upper middle area which may allow water to enter the cabin area.