Chevrolet Captiva recall: Possibility of a fire
Vehicles equipped with stop/start system might have a starter motor failure while driving due to thermal damage of the starter cable.
Every new product, food, vehicle, medicine and pet recall in the UK, newest first. Checked against official sources every 15 minutes. 10,759 listed.
Vehicles equipped with stop/start system might have a starter motor failure while driving due to thermal damage of the starter cable.
It has been identified that the front side airbags may have been fitted with the incorrect detonators. If the vehicle is involved in a collision then the airbags may not operate as intended.
Improper machining of the crankpin hole along with sulphur found in the engine oil and traces of coolant which generate hydrogen sulphide can corrode the silver plating of the connecting rod bearing retainer eventually…
Over time corrosion of the internal circuit board can lead to unpredictable functionality of the alarm. This can cause the alarm to operate and in the most severe cases may cause the motorcycle not…
The maintenance flap under the driver's window may open unintentionally.
Heated handlebar (throttle twist) grip may when turned �on� bind on the end weight or optional accessory mirror resulting in the throttle not returning without manual action by the rider.
It has been identified that due to the incorrect programming of the Brake Control Module there is a possibility that the parking brake may not be set automatically when the Brake Hold or Hill…
Vehicles equipped with stop/start system might have a starter motor failure while driving due to thermal damage of the starter cable.
It has been identified by the manufacturer that the air-bag initiator does not meet specification. This can therefore result in the initiator not functioning correctly which can lead to none deployment of the air-bag.…
The igniter for the certain airbag modules may not have been correctly manufactured which may affect air bag deployment in the event of a collision.
It has been identified that the mating surface of the vehicle body for the panoramic glass roof panel may have been contaminated during the primer phase of the instigation process. There is a possibility…
It has been identified that in the subject vehicles there is a possibility the container of the inflator of the driver�s side may rupture. Toyota has not been able to establish the cause of…
Bayer plc has informed us that they have received two complaints globally concerning Mirena inserters with an insertion tube which is mounted inversely to the handle
It has been identified by the manufacturer that the air-bag initiator does not meet specification. This can therefore result in the initiator not functioning correctly which can lead to none deployment of the air-bag.…
Sanofi has informed us that there is an error in the Braille on some batches of Arava 10mg film-coated tablets (EL (17)A/01)
It has been identified by the seat belt Pre-Tensioner manufacturer that the pre-tensioner initiator generant mix ratio does not meet specification. This can therefore result in the initiator not functioning correctly which can lead…
It has been identified that the bolt that connects the ground cable from the wiring harness of the Digital Motor Electronics (DME) to the engine block may not have been tightened/torqued to the correct…
It has been identified by the air-bag manufacturer that the air-bag initiator generant mix ratio does not meet specification. This can therefore result in the initiator not functioning correctly which can lead to non-deployment…
It has been identified by the air-bag manufacturer that the air-bag initiator generant mix ratio does not meet specification. This can therefore result in the initiator not functioning correctly which can lead to none…
It has been identified by the seat belt Pre-Tensioner manufacturer that the pre-tensioner initiator generant mix ratio does not meet specification. This can therefore result in the initiator not functioning correctly which can lead…
Vehicles included in safety recall R/2016/302 (P075) have received a modification which has subsequently been determined as not durable for the life of the vehicle. The engine harness may chafe on an engine bracket…
It has been identified that clamp bolt of the front lower control arm to knuckle fixing may have been incorrectly torqued/tighten this can cause a premature fatigue failure and possible separation of the joint.…
The air box intake snorkel that may come in contact with the fuel rail or fuel line during operation. The resulting contact between the snorkel and fuel rail or fuel line may cause a…
The passenger air bag may not meet the correct specification. In the possible event of a frontal collision front passenger airbag might not deploy as intended.