Ford Focus and C-max recall: Seat belt anchorage bolt partially engaged
Seat belt anchors and seat bolts may not be secured as per specification
Car, van, motorbike and caravan safety recalls from the DVSA. 4,885 listed.
Seat belt anchors and seat bolts may not be secured as per specification
Certain driver airbag modules might not be bolted onto the base plate.
The mechanical connection between tie rod and right front axle stub might not be ensured.
The refrigerant used in the air conditioning system does not meet legal requirements
A condenser in the airbag control unit may fail.
Oxidation on the contacts of the gear position switch may cause a change in resistance values resulting in the rider display indicating an incorrect gear
The hybrid system could shut down resulting in loss of motive power
An electrical connection within the motor may cause the brake booster pump to stop operating
An electrical connection within the motor may cause the brake booster pump to stop operating.
Incorrectly installed covers could prevent the seat-mounted side air bag from deploying properly.
The steering motor can provide steering input without any input from the driver
The curtain airbag might not deploy as intended.
A thermal overload can occur at the fuse carrier of the compressor for the air suspension as well as at the associated lines.
Vehicles may have been produced and possibly delivered without an operator's manual
The screw connection of the upper hood (bonnet) catch may not have been secured properly
The instrument cluster may display a range that is higher than what actually remains.
The refrigerant used in the air conditioning system does not meet legal requirements.
The functions e-call and Info/Service call may not work correctly due to a software fault.
The trailers do not meet European vehicle type approval standards
Fuel line may be damaged in the event of a drive belt failure
The masses applied on the VIN label may be incorrect.
Front seat frames may not be welded correctly
Software controlling the engine air / fuel ratio contains an error.
Gear change my not be performed correctly