Polaris RZR XP 1000 and XP4 1000 recall: Heat shield upgrade required
Heat shield may not adequately shield exhaust gasses in the event of an exhaust silencer crack. This could cause nearby components to melt and pose a fire hazard.
Car, van, motorbike and caravan safety recalls from the DVSA. 4,799 listed.
Heat shield may not adequately shield exhaust gasses in the event of an exhaust silencer crack. This could cause nearby components to melt and pose a fire hazard.
Fuel pump flange that when exposed to chemicals may degrade and leak causing fire risk.
Fuel pump flange that when exposed to chemicals may degrade and leak causing fire risk.
Potential failure of steering gear motor bolts when exposed to long term high corrosive environment. This can lead to loss of power assistance to the steering which would result in additional effort from the…
The brazing of the fuel rail end caps is inconsistent and may not correctly seal the fuel rail ends. Fuel vapour and liquid fuel leaks can occur over time. This can lead to a…
Tightening of some towbar fixings may not be to correct specification.
For 5.10 type axle the pinion nut may over an extended period of time. become loose due to an undersized pinion shaft spline. This may cause the pinion flange to separate and in extreme…
The Steering column may become detached from the rack due to incorrectly tightened bolt.
Driver-side and passenger-side seatbase frames may have been improperly manufactured Driver-side seatbase frames may also contain a seat slider defect.
Due to a lack of strength in the Integrated Starter Generator (ISG) Belt may break during usage. If this happens the water pump will become inoperative and the charging light will illuminate. The coolant…
The software algorithm that calculates the percentage value of wear on the carbo-ceramic brake discs of the vehicle may not function properly due to a software bug which under certain specific conditions may cause…
The front wheel hub may suffer cracking. Drivers may notice abnormal noise and in extreme cases the hub may fail.
on a certain number of Crossland X - Model Year 18 the Fastening Nut of the Rear Axle Hub might potentially become loose. This can lead to a separation of the rear wheel resulting…
Certain tyres may have an incorrect rubber compound which may cause an in service noise unsatisfactory ride experience tread distortion and/or belt separation. If undetected the tyre may fail.
The front wheel hub may suffer cracking. Drivers may notice abnormal noise and in extreme cases the hub may fail.
The front wheel hub may suffer cracking. Drivers may notice abnormal noise and in extreme cases the hub may fail.
The Steering column may become detached from the rack due to incorrectly tightened bolt.
A small batch of alloy wheels may have a casting defect that may initiate a fatigue crack and result in wheel failure.
The air inlet door linkages to the Heating Ventilation and Air Conditioning may detach become detached and depending on operating mode position cause unexpected severe condensation/fogging of the interior windows. At temperatures below 0…
The front passenger airbag inflator (PAB) may contain propellant that could possibly degrade over a period of time. This may cause metal fragments to pass through the air bag and into the vehicle interior…
The rear spoiler may not have been properly attached Wind noise and deformation of the spoiler may occur. Continued use may cause the spoiler to detach.
The front brake discs may not meet the required thickness dimension. Under extreme loads this could cause cracking which may lead to fractures.
The intercooler sleeve may detach from the throttle body. The engine management warning light will illuminate and a loss of power may occur.
Affected vehicles may have been fitted with a brake booster which may have a faulty diaphragm plate. This could lead to a loss of brake servo assistance.