Car, van, motorbike and caravan safety recalls from the DVSA. 4,885 listed.
On AMG- GT R vehicles fitted with Track package the combination of Sport Seat and Rollbar does not meet requirements. In the rearmost postion it is possibel the seat headretraint could contact the roll…
The calibration of the Restraints control Module does not provide the correct fire signals in the event of a collision. In the event of a collision the supplementary Restraint System may not provide the…
On Wrightbus StreetLite (Micro Hybrid) vehicles that are fitted with electric cooling pack fans it is possible the electrical looms (cooling pack fan harness power cable and body harness looms) and the compressor delivery…
When upshifting between first and second gear if the rider fails to engage second gear a neutral condition will exist continued opening of the throttle will cause high engine RPM. If the rider shifts…
The brazing of the fuel rail end caps is inconsistent and may not correctly seal the fuel rail ends. Fuel vapour and liquid fuel leaks can occur over time. This can lead to a…
Due to incorrect software in the Engine Control Module (ECM) the ENG A-STOP (Engine Auto Stop Start System) OFF light may blink & the ENG A-STOP system may become inoperative. If the car is…
The Steering column may become detached from the rack due to incorrectly tightened bolt
The brake/clutch system components may be damaged and system performance may decay as a result of the potential presence of mineral oil in the brake-clutch fluid because the components are not compatible with mineral…
Due to a fault in the manufacturing process the lower leaf of the parabolic spring may break. The leaf may detach and fall on to the road surface.
The engine control module calibration may not adequately detect an overheat condition in certain 2.0L Duratorq Diesel engines. In extreme cases an overheated engine can result in a breach of the oil sump leading…
On vehicles with diesel engines and stop/start system the starter motor may be permanently activated because the return spring in the solenoid switch is bent or broken. If the permanent current supply to the…
On vehicles with diesel engines and stop/start system the starter motor may be permanently activated because the return spring in the solenoid switch is bent or broken. If the permanent current supply to the…
On vehicles with diesel engines and stop/start system the starter motor may be permanently activated because the return spring in the solenoid switch is bent or broken. If the permanent current supply to the…
The front passenger airbag may be faulty. There may be insufficient protection especially for smaller passengers in the front seat because of incorrectly folded passenger airbags.
The front passenger airbag may be faulty. There may be insufficient protection especially for smaller passengers in the front seat because of incorrectly folded passenger airbags.
Owner's Manuals with incomplete information about the restraint system were delivered. Warnings instructions and information for 'Proactive Passenger Protection System' 'Airbag System' and 'Transporting Children Safely' are missing from the Owner's Manual. Without correct…
The bus bar of the fuse panel on the power distribution board (PDB) could be loose. This may cause faults in circuits associated with the fuse board circuits.
If the brake fluid has not been changed as per manufacturer's instructions deposits may form which may affect the operation of the ABS module. Continued use may lead to loss of braking.
The fuel filter support bracket may crack and the fuel filter could become insecure As a result the fuel filter and or fuel tube may leak.
Due to a nonconformity in the production process the instrument cluster may stick and display incorrect speed information.
In the event that the airbag is activated it may overinflate due to overly aggressive combustion of the propellant. As a result the excessive internal pressure may cause the inflator body to rupture and…
The propellant used in certain air bag inflators may degrade over time due to heat cycles and exposure to moisture. In the event that the airbag is activated it may overinflate due to overly…
The propellant used in the air bag inflators may degrade over time due to heat cycles and exposure to moisture. In the event that the airbag is activated it may overinflate due to overly…
The bonding of the windshield in the lower area may not correspond to the specification. During a collision the bonding may fail and the windscreen may detach. This could have an adverse affect on…