VW Golf recall: Front belt webbing
On Golf vehicles of a limited production period belt systems were fitted to front passenger seat that may not have been correctly attached to the anchoring point near the lower B pillar.
Car, van, motorbike and caravan safety recalls from the DVSA. 4,886 listed.
On Golf vehicles of a limited production period belt systems were fitted to front passenger seat that may not have been correctly attached to the anchoring point near the lower B pillar.
On Golf vehicles of a limited production period belt systems were fitted to front passenger seat that may not have been correctly attached to the anchoring point near the lower B pillar.
On affected vehicles there is a risk in the event of an accident that if the passenger airbag is activated the protective effect of the airbag may be reduced and the gas generator cover…
Ford constantly monitors production processes and vehicles in operation. While monitoring vehicles in operation we have become aware of a number of Transit Chassis vehicles which may require a strengthening plate to be fitted…
There is a possibility that a locking ring on the air-spring strut at the front left and right was not fitted according to specifications on the affected vehicles. If this is the case the…
Certain Kuga S-Max and Galaxy vehicles equipped with a 2.5L HEV/PHEV Engine may not have the remedy for Safety Recall 23S27 installed correctly but were recorded as having received the repair successfully. Because the…
The crankcase fastening bolts may have been over-tightened during production. This can cause seizure of the crankshaft main bearing leading to abnormal noise and engine stalling.
Affected vehicles have been manufactured with a rear right seatbelt bracket that could potentially have a missing weld. The absence of the weld could compromise the integrity of the seatbelt system during an accident.
On affected vehicles there is an issue with the inline connector that joins the bumper wiring harness and the engine bay harness. There is a risk of fluid ingress into the connector housing resulting…
On affected vehicles the passenger airbag inflator housing may rupture due to excessive internal pressure during normal airbag deployment events. An inflator rupture during airbag deployment events could result in metal fragments striking and…
It has been determined that due to a parameter error of the VRDU3 in the event of a fault in the SideGuardAssist assistance system (for example in the form of a sensor fault) the…
Vehicles may be affected by premature wearing of the camshaft drive chain leading to abnormal noise or to a breakage of the chain in the worst case.
Vehicles may be affected by premature wearing of the camshaft drive chain leading to abnormal noise or to a breakage of the chain in the worst case.
Vehicles may be affected by premature wearing of the camshaft drive chain leading to abnormal noise or to a breakage of the chain in the worst case.
Vehicles may be affected by premature wearing of the camshaft drive chain leading to abnormal noise or to a breakage of the chain in the worst case.
On affected vehicles the Motor Control Unit does not communicate with the Body Control Unit. This may cause an immobiliser malfunction leading to a possible vehicle non-start and anti-theft protection not guaranteed.
A retaining ring may not be securely seated in the area of the support mounting on the air spring struts on your vehicle. If the retaining ring comes loose from its groove air will…
Mercedes-Benz AG has determined that on certain GLE/GLS (167 platform) and GLC (254 platform) vehicles the bonding of the multi-purpose camera and/or the interior mirror on the windscreen might not meet specifications.
Mercedes-Benz AG has determined that on certain GLE/GLS (167 platform) and GLC (254 platform) vehicles the bonding of the multi-purpose camera and/or the interior mirror on the windscreen might not meet specifications.
On affected vehicles defective passenger airbags may have been fitted. On affected vehicles the passenger airbag should be deactivated and the passenger seat not used until the recall action has been completed.
For affected machines when the front brake is applied whilst riding it is catching the brake pad securing pin. Examination has shown that an incorrect wheel spacer and incorrectly sized caliper holding bracket may…
On affected vehicles the engine idler gear bolt may shear resulting in the idler gear dropping and primary drive failure. This can result in complete engine failure leading to a stall and/or no start…
ESS Traction battery. There is a risk that a small metal piece from a broken terminal fixation might come loose and create a short circuit between battery cells inside the traction battery which might…
There is a potential issue with a vehicle brake line installation on a MY24/25 Trekker motorhome product. The freshwater tank installation which is designed and installed by Swift as part of the motorhome base…